e1000e: Add ICR clearing by corresponding IMS bit

The datasheet does not say what happens when interrupt was asserted
(ICR.INT_ASSERT=1) and auto mask is *not* active.
However, section of 13.3.27 the PCIe* GbE Controllers Open Source
Software Developer’s Manual, which were written for older devices,
namely 631xESB/632xESB, 82563EB/82564EB, 82571EB/82572EI &
82573E/82573V/82573L, does say:
> If IMS = 0b, then the ICR register is always clear-on-read. If IMS is
> not 0b, but some ICR bit is set where the corresponding IMS bit is not
> set, then a read does not clear the ICR register. For example, if
> IMS = 10101010b and ICR = 01010101b, then a read to the ICR register
> does not clear it. If IMS = 10101010b and ICR = 0101011b, then a read
> to the ICR register clears it entirely (ICR.INT_ASSERTED = 1b).

Linux does no longer activate auto mask since commit
0a8047ac68e50e4ccbadcfc6b6b070805b976885 and the real hardware clears
ICR even in such a case so we also should do so.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1707441
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c
index 9f185d099c4b20e6d35e73b4af6212487c036ff1..f8aeafa16be9ebc2ebafe06c1018f3d324a6df2f 100644 (file)
--- a/hw/net/e1000e_core.c
+++ b/hw/net/e1000e_core.c
@@ -2604,12 +2604,38 @@ e1000e_mac_icr_read(E1000ECore *core, int index)
         e1000e_lower_interrupts(core, ICR, 0xffffffff);
     }
 
-    if ((core->mac[ICR] & E1000_ICR_ASSERTED) &&
-        (core->mac[CTRL_EXT] & E1000_CTRL_EXT_IAME)) {
-        trace_e1000e_irq_icr_clear_iame();
-        e1000e_lower_interrupts(core, ICR, 0xffffffff);
-        trace_e1000e_irq_icr_process_iame();
-        e1000e_lower_interrupts(core, IMS, core->mac[IAM]);
+    if (core->mac[ICR] & E1000_ICR_ASSERTED) {
+        if (core->mac[CTRL_EXT] & E1000_CTRL_EXT_IAME) {
+            trace_e1000e_irq_icr_clear_iame();
+            e1000e_lower_interrupts(core, ICR, 0xffffffff);
+            trace_e1000e_irq_icr_process_iame();
+            e1000e_lower_interrupts(core, IMS, core->mac[IAM]);
+        }
+
+        /*
+         * The datasheet does not say what happens when interrupt was asserted
+         * (ICR.INT_ASSERT=1) and auto mask is *not* active.
+         * However, section of 13.3.27 the PCIe* GbE Controllers Open Source
+         * Software Developer’s Manual, which were written for older devices,
+         * namely 631xESB/632xESB, 82563EB/82564EB, 82571EB/82572EI &
+         * 82573E/82573V/82573L, does say:
+         * > If IMS = 0b, then the ICR register is always clear-on-read. If IMS
+         * > is not 0b, but some ICR bit is set where the corresponding IMS bit
+         * > is not set, then a read does not clear the ICR register. For
+         * > example, if IMS = 10101010b and ICR = 01010101b, then a read to the
+         * > ICR register does not clear it. If IMS = 10101010b and
+         * > ICR = 0101011b, then a read to the ICR register clears it entirely
+         * > (ICR.INT_ASSERTED = 1b).
+         *
+         * Linux does no longer activate auto mask since commit
+         * 0a8047ac68e50e4ccbadcfc6b6b070805b976885 and the real hardware
+         * clears ICR even in such a case so we also should do so.
+         */
+        if (core->mac[ICR] & core->mac[IMS]) {
+            trace_e1000e_irq_icr_clear_icr_bit_ims(core->mac[ICR],
+                                                   core->mac[IMS]);
+            e1000e_lower_interrupts(core, ICR, 0xffffffff);
+        }
     }
 
     return ret;

diff --git a/hw/net/trace-events b/hw/net/trace-events
index e4a98b2c7d2065439e4bbe6bc694ccdacd217970..3eeacc530cb48eae7897d9cc71e376c18f58c36f 100644 (file)
--- a/hw/net/trace-events
+++ b/hw/net/trace-events
@@ -217,6 +217,7 @@ e1000e_irq_read_ims(uint32_t ims) "Current IMS: 0x%x"
 e1000e_irq_icr_clear_nonmsix_icr_read(void) "Clearing ICR on read due to non MSI-X int"
 e1000e_irq_icr_clear_zero_ims(void) "Clearing ICR on read due to zero IMS"
 e1000e_irq_icr_clear_iame(void) "Clearing ICR on read due to IAME"
+e1000e_irq_icr_clear_icr_bit_ims(uint32_t icr, uint32_t ims) "Clearing ICR on read due corresponding IMS bit: 0x%x & 0x%x"
 e1000e_irq_iam_clear_eiame(uint32_t iam, uint32_t cause) "Clearing IMS due to EIAME, IAM: 0x%X, cause: 0x%X"
 e1000e_irq_icr_clear_eiac(uint32_t icr, uint32_t eiac) "Clearing ICR bits due to EIAC, ICR: 0x%X, EIAC: 0x%X"
 e1000e_irq_ims_clear_set_imc(uint32_t val) "Clearing IMS bits due to IMC write 0x%x"