arm64: dts: qcom: sm8150-hdk: enable WiFI support

Enable modem DSP and WiFI devices on the SM8150 HDK device. The HDK is
manufactured by Lantronix, but it attributed to Qualcomm, so the
calibration string uses Qualcomm as manufacturer.

For reference:

ath10k_snoc 18800000.wifi: qmi chip_id 0x30224 chip_family 0x4001 board_id 0x55 soc_id 0x40060000
ath10k_snoc 18800000.wifi: qmi fw_version 0x32040163 fw_build_timestamp 2019-10-08 05:42 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.0-00355-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.73 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240403-sm8150-hdk-wifi-v1-1-8da3063829c2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index de670b407ef1425f7de2d2aa822a574a3a7496e3..6cb6f503fdac95c7b0ff902c7662830b9d27efd8 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -609,6 +609,11 @@
        firmware-name = "qcom/sm8150/cdsp.mbn";
 };
 
+&remoteproc_mpss {
+       firmware-name = "qcom/sm8150/modem.mbn";
+       status = "okay";
+};
+
 &remoteproc_slpi {
        status = "okay";
 
@@ -713,3 +718,14 @@
 &usb_2_dwc3 {
        dr_mode = "host";
 };
+
+&wifi {
+       status = "okay";
+
+       vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>;
+       vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+       vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+       vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+
+       qcom,ath10k-calibration-variant = "Qualcomm_sm8150hdk";
+};