hw/misc/mps2-fpgaio: Make number of LEDs configurable by board

The MPS2 board has 2 LEDs, but the MPS3 board has 10 LEDs.  The
FPGAIO device is similar on both sets of boards, but the LED0
register has correspondingly more bits that have an effect.  Add a
device property for number of LEDs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210215115138.20465-6-peter.maydell@linaro.org

diff --git a/hw/misc/mps2-fpgaio.c b/hw/misc/mps2-fpgaio.c
index 6af0e8f837aa269311466139d4f9ad76fa40201c..e74dec670f0738ef5d45aa9e55841c871d70d73a 100644 (file)
--- a/hw/misc/mps2-fpgaio.c
+++ b/hw/misc/mps2-fpgaio.c
@@ -177,9 +177,14 @@ static void mps2_fpgaio_write(void *opaque, hwaddr offset, uint64_t value,
 
     switch (offset) {
     case A_LED0:
-        s->led0 = value & 0x3;
-        led_set_state(s->led[0], value & 0x01);
-        led_set_state(s->led[1], value & 0x02);
+        if (s->num_leds != 0) {
+            uint32_t i;
+
+            s->led0 = value & MAKE_64BIT_MASK(0, s->num_leds);
+            for (i = 0; i < s->num_leds; i++) {
+                led_set_state(s->led[i], value & (1 << i));
+            }
+        }
         break;
     case A_PRESCALE:
         resync_counter(s);
@@ -238,7 +243,7 @@ static void mps2_fpgaio_reset(DeviceState *dev)
     s->pscntr = 0;
     s->pscntr_sync_ticks = now;
 
-    for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) {
+    for (size_t i = 0; i < s->num_leds; i++) {
         device_cold_reset(DEVICE(s->led[i]));
     }
 }
@@ -256,11 +261,19 @@ static void mps2_fpgaio_init(Object *obj)
 static void mps2_fpgaio_realize(DeviceState *dev, Error **errp)
 {
     MPS2FPGAIO *s = MPS2_FPGAIO(dev);
+    uint32_t i;
+
+    if (s->num_leds > MPS2FPGAIO_MAX_LEDS) {
+        error_setg(errp, "num-leds cannot be greater than %d",
+                   MPS2FPGAIO_MAX_LEDS);
+        return;
+    }
 
-    s->led[0] = led_create_simple(OBJECT(dev), GPIO_POLARITY_ACTIVE_HIGH,
-                                  LED_COLOR_GREEN, "USERLED0");
-    s->led[1] = led_create_simple(OBJECT(dev), GPIO_POLARITY_ACTIVE_HIGH,
-                                  LED_COLOR_GREEN, "USERLED1");
+    for (i = 0; i < s->num_leds; i++) {
+        g_autofree char *ledname = g_strdup_printf("USERLED%d", i);
+        s->led[i] = led_create_simple(OBJECT(dev), GPIO_POLARITY_ACTIVE_HIGH,
+                                      LED_COLOR_GREEN, ledname);
+    }
 }
 
 static bool mps2_fpgaio_counters_needed(void *opaque)
@@ -303,6 +316,8 @@ static const VMStateDescription mps2_fpgaio_vmstate = {
 static Property mps2_fpgaio_properties[] = {
     /* Frequency of the prescale counter */
     DEFINE_PROP_UINT32("prescale-clk", MPS2FPGAIO, prescale_clk, 20000000),
+    /* Number of LEDs controlled by LED0 register */
+    DEFINE_PROP_UINT32("num-leds", MPS2FPGAIO, num_leds, 2),
     DEFINE_PROP_END_OF_LIST(),
 };
 

diff --git a/include/hw/misc/mps2-fpgaio.h b/include/hw/misc/mps2-fpgaio.h
index a010fdb2b6d11941e8a0c38219947bc19ec8eefc..bfe73134e7875094cbb7ba9d0b4373027d331619 100644 (file)
--- a/include/hw/misc/mps2-fpgaio.h
+++ b/include/hw/misc/mps2-fpgaio.h
@@ -28,13 +28,16 @@
 #define TYPE_MPS2_FPGAIO "mps2-fpgaio"
 OBJECT_DECLARE_SIMPLE_TYPE(MPS2FPGAIO, MPS2_FPGAIO)
 
+#define MPS2FPGAIO_MAX_LEDS 32
+
 struct MPS2FPGAIO {
     /*< private >*/
     SysBusDevice parent_obj;
 
     /*< public >*/
     MemoryRegion iomem;
-    LEDState *led[2];
+    LEDState *led[MPS2FPGAIO_MAX_LEDS];
+    uint32_t num_leds;
 
     uint32_t led0;
     uint32_t prescale;