drm: xlnx: zynqmp_dpsub: Move encoder to DPSUB core

As part of the transitition of the DP encoder to a DRM bridge, turn the
DRM encoder into a dummy encoder and move it out of the DP code, to the
DPSUB core. DP encoder operations are handled by the DP bridge, which is
now attached to the encoder.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index 65b1ab4e4d2ddbb810439d3c0fe0c52fdb9df69e..28f92b5d8385dd32d1820f6bf45aeb2aece0623b 100644 (file)
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -15,12 +15,10 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_device.h>
 #include <drm/drm_edid.h>
-#include <drm/drm_encoder.h>
 #include <drm/drm_managed.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_of.h>
 #include <drm/drm_probe_helper.h>
-#include <drm/drm_simple_kms_helper.h>
 
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -277,7 +275,6 @@ struct zynqmp_dp_config {
 
 /**
  * struct zynqmp_dp - Xilinx DisplayPort core
- * @encoder: the drm encoder structure
  * @connector: the drm connector structure
  * @dev: device structure
  * @dpsub: Display subsystem
@@ -299,7 +296,6 @@ struct zynqmp_dp_config {
  * @train_set: set of training data
  */
 struct zynqmp_dp {
-       struct drm_encoder encoder;
        struct drm_connector connector;
        struct device *dev;
        struct zynqmp_dpsub *dpsub;
@@ -324,11 +320,6 @@ struct zynqmp_dp {
        u8 train_set[ZYNQMP_DP_MAX_LANES];
 };
 
-static inline struct zynqmp_dp *encoder_to_dp(struct drm_encoder *encoder)
-{
-       return container_of(encoder, struct zynqmp_dp, encoder);
-}
-
 static inline struct zynqmp_dp *connector_to_dp(struct drm_connector *connector)
 {
        return container_of(connector, struct zynqmp_dp, connector);
@@ -1566,7 +1557,7 @@ zynqmp_dp_connector_best_encoder(struct drm_connector *connector)
 {
        struct zynqmp_dp *dp = connector_to_dp(connector);
 
-       return &dp->encoder;
+       return &dp->dpsub->encoder;
 }
 
 static int zynqmp_dp_connector_mode_valid(struct drm_connector *connector,
@@ -1594,55 +1585,6 @@ zynqmp_dp_connector_helper_funcs = {
        .mode_valid     = zynqmp_dp_connector_mode_valid,
 };
 
-/* -----------------------------------------------------------------------------
- * DRM Encoder
- */
-
-static void zynqmp_dp_encoder_atomic_enable(struct drm_encoder *encoder,
-                                           struct drm_atomic_state *state)
-{
-       struct zynqmp_dp *dp = encoder_to_dp(encoder);
-       struct drm_bridge_state bridge_state;
-
-       bridge_state.base.state = state;
-       zynqmp_dp_bridge_atomic_enable(&dp->bridge, &bridge_state);
-}
-
-static void zynqmp_dp_encoder_atomic_disable(struct drm_encoder *encoder,
-                                            struct drm_atomic_state *state)
-{
-       struct zynqmp_dp *dp = encoder_to_dp(encoder);
-       struct drm_bridge_state bridge_state;
-
-       bridge_state.base.state = state;
-       zynqmp_dp_bridge_atomic_disable(&dp->bridge, &bridge_state);
-}
-
-static void
-zynqmp_dp_encoder_atomic_mode_set(struct drm_encoder *encoder,
-                                 struct drm_crtc_state *crtc_state,
-                                 struct drm_connector_state *connector_state)
-{
-}
-
-static int
-zynqmp_dp_encoder_atomic_check(struct drm_encoder *encoder,
-                              struct drm_crtc_state *crtc_state,
-                              struct drm_connector_state *conn_state)
-{
-       struct zynqmp_dp *dp = encoder_to_dp(encoder);
-
-       return zynqmp_dp_bridge_atomic_check(&dp->bridge, NULL, crtc_state,
-                                            conn_state);
-}
-
-static const struct drm_encoder_helper_funcs zynqmp_dp_encoder_helper_funcs = {
-       .atomic_enable          = zynqmp_dp_encoder_atomic_enable,
-       .atomic_disable         = zynqmp_dp_encoder_atomic_disable,
-       .atomic_mode_set        = zynqmp_dp_encoder_atomic_mode_set,
-       .atomic_check           = zynqmp_dp_encoder_atomic_check,
-};
-
 /* -----------------------------------------------------------------------------
  * Interrupt Handling
  */
@@ -1731,32 +1673,17 @@ int zynqmp_dp_drm_init(struct zynqmp_dpsub *dpsub)
 {
        struct zynqmp_dp *dp = dpsub->dp;
        struct drm_bridge *bridge = &dp->bridge;
-       struct drm_encoder *encoder = &dp->encoder;
        int ret;
 
        dp->config.misc0 &= ~ZYNQMP_DP_MAIN_STREAM_MISC0_SYNC_LOCK;
        zynqmp_dp_set_format(dp, NULL, ZYNQMP_DPSUB_FORMAT_RGB, 8);
 
-       /*
-        * Initialize the bridge. Setting the device and encoder manually is a
-        * hack, to be removed once the bridge will get attached to the encoder
-        * using the bridge API.
-        */
-       bridge->dev = dp->drm;
-       bridge->encoder = &dp->encoder;
+       /* Initialize the bridge. */
        bridge->funcs = &zynqmp_dp_bridge_funcs;
        bridge->ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID
                    | DRM_BRIDGE_OP_HPD;
        bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
-
-       /* Create the DRM encoder and attach the bridge. */
-       encoder->possible_crtcs |= zynqmp_disp_get_crtc_mask(dpsub->disp);
-       drm_simple_encoder_init(dp->drm, encoder, DRM_MODE_ENCODER_TMDS);
-       drm_encoder_helper_add(encoder, &zynqmp_dp_encoder_helper_funcs);
-
-       ret = zynqmp_dp_bridge_attach(bridge, 0);
-       if (ret < 0)
-               return ret;
+       dpsub->bridge = bridge;
 
        /* Initialize and register the AUX adapter. */
        ret = zynqmp_dp_aux_init(dp);

diff --git a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
index 1de2d927c32b07fc774b9e27575fcf28e3594791..bb7c74a73dc21f10c06693322602a1be0527e544 100644 (file)
--- a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
@@ -17,6 +17,7 @@
 #include <linux/pm_runtime.h>
 
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
 #include <drm/drm_device.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_fb_helper.h>
@@ -27,6 +28,7 @@
 #include <drm/drm_mode_config.h>
 #include <drm/drm_module.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
 #include <drm/drm_vblank.h>
 
 #include "zynqmp_disp.h"
@@ -94,6 +96,7 @@ static const struct drm_driver zynqmp_dpsub_drm_driver = {
 
 static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
 {
+       struct drm_encoder *encoder = &dpsub->encoder;
        struct drm_device *drm = &dpsub->drm;
        int ret;
 
@@ -116,8 +119,7 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
 
        /*
         * Initialize the DISP and DP components. This will creates planes,
-        * CRTC, encoder and connector. The DISP should be initialized first as
-        * the DP encoder needs the CRTC.
+        * CRTC, and a bridge for the DP encoder.
         */
        ret = zynqmp_disp_drm_init(dpsub);
        if (ret)
@@ -127,6 +129,16 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
        if (ret)
                goto err_poll_fini;
 
+       /* Create the encoder and attach the bridge. */
+       encoder->possible_crtcs |= zynqmp_disp_get_crtc_mask(dpsub->disp);
+       drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_NONE);
+
+       ret = drm_bridge_attach(encoder, dpsub->bridge, NULL, 0);
+       if (ret) {
+               dev_err(dpsub->dev, "failed to attach bridge to encoder\n");
+               goto err_poll_fini;
+       }
+
        /* Reset all components and register the DRM device. */
        drm_mode_config_reset(drm);
 

diff --git a/drivers/gpu/drm/xlnx/zynqmp_dpsub.h b/drivers/gpu/drm/xlnx/zynqmp_dpsub.h
index c04026d82639cc3dac71a068cb2e13dd2b7aa79e..66820bbc4507fc8bea46e8f636254843232e4cf6 100644 (file)
--- a/drivers/gpu/drm/xlnx/zynqmp_dpsub.h
+++ b/drivers/gpu/drm/xlnx/zynqmp_dpsub.h
@@ -12,8 +12,11 @@
 #ifndef _ZYNQMP_DPSUB_H_
 #define _ZYNQMP_DPSUB_H_
 
+#include <drm/drm_encoder.h>
+
 struct clk;
 struct device;
+struct drm_bridge;
 struct drm_device;
 struct zynqmp_disp;
 struct zynqmp_dp;
@@ -30,6 +33,8 @@ enum zynqmp_dpsub_format {
  * @drm: The DRM/KMS device
  * @dev: The physical device
  * @apb_clk: The APB clock
+ * @encoder: The dummy DRM encoder
+ * @bridge: The DP encoder bridge
  * @disp: The display controller
  * @dp: The DisplayPort controller
  * @dma_align: DMA alignment constraint (must be a power of 2)
@@ -40,6 +45,9 @@ struct zynqmp_dpsub {
 
        struct clk *apb_clk;
 
+       struct drm_encoder encoder;
+       struct drm_bridge *bridge;
+
        struct zynqmp_disp *disp;
        struct zynqmp_dp *dp;