arm64: dts: imx8mm-verdin: use level interrupt for mcp251xfd

Switch to level interrupt for mcp251xfd. This will make sure no
interrupts are lost.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index b4153e04f0635b93c098b9bf9c1fc2a8cddb0c1b..702bd55808c84461496fb57c83ba91626608c641 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -203,7 +203,7 @@
        can1: can@0 {
                compatible = "microchip,mcp251xfd";
                clocks = <&clk40m>;
-               interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;
+               interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_can1_int>;
                reg = <0>;