MIPS: Loongson32: Fix PHY-mode being left unspecified

commit 0060c8783330 ("net: stmmac: implement support for passive mode
converters via dt") has changed the plat->interface field semantics from
containing the PHY-mode to specifying the MAC-PCS interface mode. Due to
that the loongson32 platform code will leave the phylink interface
uninitialized with the PHY-mode intended by the means of the actual
platform setup. The commit-author most likely has just missed the
arch-specific code to fix. Let's mend the Loongson32 platform code then by
assigning the PHY-mode to the phy_interface field of the STMMAC platform
data.

Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index 794c96c2a4cdd96cbaedb651b36a0421b09cbf37..311dc1580bbde98e59f33f508afba7695714923d 100644 (file)
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -98,7 +98,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
        if (plat_dat->bus_id) {
                __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
                             GMAC1_USE_UART0, LS1X_MUX_CTRL0);
-               switch (plat_dat->interface) {
+               switch (plat_dat->phy_interface) {
                case PHY_INTERFACE_MODE_RGMII:
                        val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
                        break;
@@ -107,12 +107,12 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
                        break;
                default:
                        pr_err("unsupported mii mode %d\n",
-                              plat_dat->interface);
+                              plat_dat->phy_interface);
                        return -ENOTSUPP;
                }
                val &= ~GMAC1_SHUT;
        } else {
-               switch (plat_dat->interface) {
+               switch (plat_dat->phy_interface) {
                case PHY_INTERFACE_MODE_RGMII:
                        val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
                        break;
@@ -121,7 +121,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
                        break;
                default:
                        pr_err("unsupported mii mode %d\n",
-                              plat_dat->interface);
+                              plat_dat->phy_interface);
                        return -ENOTSUPP;
                }
                val &= ~GMAC0_SHUT;
@@ -131,7 +131,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
        plat_dat = dev_get_platdata(&pdev->dev);
 
        val &= ~PHY_INTF_SELI;
-       if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
+       if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
                val |= 0x4 << PHY_INTF_SELI_SHIFT;
        __raw_writel(val, LS1X_MUX_CTRL1);
 
@@ -146,9 +146,9 @@ static struct plat_stmmacenet_data ls1x_eth0_pdata = {
        .bus_id                 = 0,
        .phy_addr               = -1,
 #if defined(CONFIG_LOONGSON1_LS1B)
-       .interface              = PHY_INTERFACE_MODE_MII,
+       .phy_interface          = PHY_INTERFACE_MODE_MII,
 #elif defined(CONFIG_LOONGSON1_LS1C)
-       .interface              = PHY_INTERFACE_MODE_RMII,
+       .phy_interface          = PHY_INTERFACE_MODE_RMII,
 #endif
        .mdio_bus_data          = &ls1x_mdio_bus_data,
        .dma_cfg                = &ls1x_eth_dma_cfg,
@@ -186,7 +186,7 @@ struct platform_device ls1x_eth0_pdev = {
 static struct plat_stmmacenet_data ls1x_eth1_pdata = {
        .bus_id                 = 1,
        .phy_addr               = -1,
-       .interface              = PHY_INTERFACE_MODE_MII,
+       .phy_interface          = PHY_INTERFACE_MODE_MII,
        .mdio_bus_data          = &ls1x_mdio_bus_data,
        .dma_cfg                = &ls1x_eth_dma_cfg,
        .has_gmac               = 1,