thermal/drivers/sun8i: Add D1/T113s THS controller support

This patch adds a thermal sensor controller support for the D1/T113s,
which is similar to the one on H6, but with only one sensor and
different scale and offset values.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231217210629.131486-3-bigunclemax@gmail.com

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index f989b55a8aa8e35a07ff646f44cfc19721b0daa8..6a8e386dbc8dc2972461c59295d3d3661f1d6248 100644 (file)
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -606,6 +606,18 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
        .calc_temp = sun8i_ths_calc_temp,
 };
 
+static const struct ths_thermal_chip sun20i_d1_ths = {
+       .sensor_num = 1,
+       .has_bus_clk_reset = true,
+       .offset = 188552,
+       .scale = 673,
+       .temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+       .calibrate = sun50i_h6_ths_calibrate,
+       .init = sun50i_h6_thermal_init,
+       .irq_ack = sun50i_h6_irq_ack,
+       .calc_temp = sun8i_ths_calc_temp,
+};
+
 static const struct of_device_id of_ths_match[] = {
        { .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
        { .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
@@ -614,6 +626,7 @@ static const struct of_device_id of_ths_match[] = {
        { .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths },
        { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
        { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
+       { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths },
        { /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, of_ths_match);