* stations connected and using at least that link as one of its links.
*
* @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * destination %NL80211_ATTR_MAC on the interface identified by
- * %NL80211_ATTR_IFINDEX.
+ * destination %NL80211_ATTR_MAC on the interface identified by
+ * %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
- * destination %NL80211_ATTR_MAC on the interface identified by
- * %NL80211_ATTR_IFINDEX.
+ * destination %NL80211_ATTR_MAC on the interface identified by
+ * %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
* %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
* @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
* after being queried by the kernel. CRDA replies by sending a regulatory
* domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
* current alpha2 if it found a match. It also provides
- * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * regulatory rule is a nested set of attributes given by
- * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ * regulatory rule is a nested set of attributes given by
+ * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
* @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * store this as a valid request and then query userspace for it.
+ * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ * store this as a valid request and then query userspace for it.
*
* @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
* interface identified by %NL80211_ATTR_IFINDEX
* @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
*
* @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * has been changed and provides details of the request information
- * that caused the change such as who initiated the regulatory request
- * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * to (%NL80211_ATTR_REG_ALPHA2).
+ * has been changed and provides details of the request information
+ * that caused the change such as who initiated the regulatory request
+ * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ * to (%NL80211_ATTR_REG_ALPHA2).
* @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * has been found while world roaming thus enabling active scan or
- * any mode of operation that initiates TX (beacons) on a channel
- * where we would not have been able to do either before. As an example
- * if you are world roaming (regulatory domain set to world or if your
- * driver is using a custom world roaming regulatory domain) and while
- * doing a passive scan on the 5 GHz band you find an AP there (if not
- * on a DFS channel) you will now be able to actively scan for that AP
- * or use AP mode on your card on that same channel. Note that this will
- * never be used for channels 1-11 on the 2 GHz band as they are always
- * enabled world wide. This beacon hint is only sent if your device had
- * either disabled active scanning or beaconing on a channel. We send to
- * userspace the wiphy on which we removed a restriction from
- * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * the beacon hint was processed.
+ * has been found while world roaming thus enabling active scan or
+ * any mode of operation that initiates TX (beacons) on a channel
+ * where we would not have been able to do either before. As an example
+ * if you are world roaming (regulatory domain set to world or if your
+ * driver is using a custom world roaming regulatory domain) and while
+ * doing a passive scan on the 5 GHz band you find an AP there (if not
+ * on a DFS channel) you will now be able to actively scan for that AP
+ * or use AP mode on your card on that same channel. Note that this will
+ * never be used for channels 1-11 on the 2 GHz band as they are always
+ * enabled world wide. This beacon hint is only sent if your device had
+ * either disabled active scanning or beaconing on a channel. We send to
+ * userspace the wiphy on which we removed a restriction from
+ * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ * the beacon hint was processed.
*
* @NL80211_CMD_AUTHENTICATE: authentication request and notification.
* This command is used both as a command (request to authenticate) and
* (see &enum nl80211_plink_action).
* @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
* @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
* &enum nl80211_mpath_info.
*
* @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
* &enum nl80211_mntr_flags.
*
* @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * current regulatory domain should be set to or is already set to.
- * For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * to query the CRDA to retrieve one regulatory domain. This attribute can
- * also be used by userspace to query the kernel for the currently set
- * regulatory domain. We chose an alpha2 as that is also used by the
- * IEEE-802.11 country information element to identify a country.
- * Users can also simply ask the wireless core to set regulatory domain
- * to a specific alpha2.
+ * current regulatory domain should be set to or is already set to.
+ * For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ * to query the CRDA to retrieve one regulatory domain. This attribute can
+ * also be used by userspace to query the kernel for the currently set
+ * regulatory domain. We chose an alpha2 as that is also used by the
+ * IEEE-802.11 country information element to identify a country.
+ * Users can also simply ask the wireless core to set regulatory domain
+ * to a specific alpha2.
* @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
* rules.
*
* @NL80211_ATTR_BSS: scan result BSS
*
* @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
* @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
*
* @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
* an array of command numbers (i.e. a mapping index to command number)
* a u32
*
* @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * due to considerations from a beacon hint. This attribute reflects
- * the state of the channel _before_ the beacon hint processing. This
- * attributes consists of a nested attribute containing
- * NL80211_FREQUENCY_ATTR_*
+ * due to considerations from a beacon hint. This attribute reflects
+ * the state of the channel _before_ the beacon hint processing. This
+ * attributes consists of a nested attribute containing
+ * NL80211_FREQUENCY_ATTR_*
* @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * due to considerations from a beacon hint. This attribute reflects
- * the state of the channel _after_ the beacon hint processing. This
- * attributes consists of a nested attribute containing
- * NL80211_FREQUENCY_ATTR_*
+ * due to considerations from a beacon hint. This attribute reflects
+ * the state of the channel _after_ the beacon hint processing. This
+ * attributes consists of a nested attribute containing
+ * NL80211_FREQUENCY_ATTR_*
*
* @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
* cipher suites
* scheduled scan is started. Or the delay before a WoWLAN
* net-detect scan is started, counting from the moment the
* system is suspended. This value is a u32, in seconds.
-
+ *
* @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
* is operating in an indoor environment.
*
* (u64, to this station)
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * containing info as possible, see &enum nl80211_rate_info
+ * containing info as possible, see &enum nl80211_rate_info
* @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
* (u32, from this station)
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
* @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
* @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
* @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * &enum nl80211_mpath_flags;
+ * &enum nl80211_mpath_flags;
* @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
* @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
* @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
* @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
* regulatory domain.
* @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
- * are permitted on this channel, this includes sending probe
- * requests, or modes of operation that require beaconing.
+ * are permitted on this channel, this includes sending probe
+ * requests, or modes of operation that require beaconing.
* @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
/**
* enum nl80211_initiator - Indicates the initiator of a reg domain request
* @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * regulatory domain.
+ * regulatory domain.
* @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * regulatory domain.
+ * regulatory domain.
* @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * wireless core it thinks its knows the regulatory domain we should be in.
+ * wireless core it thinks its knows the regulatory domain we should be in.
* @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 802.11 country information element with regulatory information it
- * thinks we should consider. cfg80211 only processes the country
+ * 802.11 country information element with regulatory information it
+ * thinks we should consider. cfg80211 only processes the country
* code from the IE, and relies on the regulatory domain information
* structure passed by userspace (CRDA) from our wireless-regdb.
* If a channel is enabled but the country code indicates it should
* to a specific country. When this is set you can count on the
* ISO / IEC 3166 alpha2 country code being valid.
* @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * domain.
+ * domain.
* @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * driver specific world regulatory domain. These do not apply system-wide
- * and are only applicable to the individual devices which have requested
- * them to be applied.
+ * driver specific world regulatory domain. These do not apply system-wide
+ * and are only applicable to the individual devices which have requested
+ * them to be applied.
* @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
* of an intersection between two regulatory domains -- the previously
* set regulatory domain on the system and the last accepted regulatory
* enum nl80211_reg_rule_attr - regulatory rule attributes
* @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * considerations for a given frequency range. These are the
- * &enum nl80211_reg_rule_flags.
+ * considerations for a given frequency range. These are the
+ * &enum nl80211_reg_rule_flags.
* @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * rule in KHz. This is not a center of frequency but an actual regulatory
- * band edge.
+ * rule in KHz. This is not a center of frequency but an actual regulatory
+ * band edge.
* @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * in KHz. This is not a center a frequency but an actual regulatory
- * band edge.
+ * in KHz. This is not a center a frequency but an actual regulatory
+ * band edge.
* @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
* frequency range, in KHz.
* @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * for a given frequency range. The value is in mBi (100 * dBi).
- * If you don't have one then don't send this.
+ * for a given frequency range. The value is in mBi (100 * dBi).
+ * If you don't have one then don't send this.
* @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * a given frequency range. The value is in mBm (100 * dBm).
+ * a given frequency range. The value is in mBm (100 * dBm).
* @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
* If not present or 0 default CAC time will be used.
* @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
* @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
* @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
* @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
- * this includes probe requests or modes of operation that require
- * beaconing.
+ * this includes probe requests or modes of operation that require
+ * beaconing.
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges.
* @NL80211_RRF_NO_EHT: EHT operation not allowed
* @NL80211_RRF_PSD: Ruleset has power spectral density value
* @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
- peer-to-peer or adhoc communication under the control of a DFS master
- which operates on the same channel (FCC-594280 D01 Section B.3).
- Should be used together with %NL80211_RRF_DFS only.
+ * peer-to-peer or adhoc communication under the control of a DFS master
+ * which operates on the same channel (FCC-594280 D01 Section B.3).
+ * Should be used together with %NL80211_RRF_DFS only.
* @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
* @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
*/
projects / linux.git / commitdiff