arm64: dts: qcom: sdm450: Add device tree for Motorola Moto G6

Add device tree for the Motorola Moto G6 (ali) smartphone. This device
is based on Snapdragon 450 (sdm450) SoC which is a variant of MSM8953.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221207-msm8953-6-1-next-dtbs-v3-v3-3-a64b3b0af0eb@z3ntu.xyz

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5d281436172db8025da52906bd19448158567974..17ff090ea6b604376a80e9a5828b62701e25e56f 100644 (file)
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_QCOM)     += sc7280-crd-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sc8280xp-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sc8280xp-lenovo-thinkpad-x13s.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sda660-inforce-ifc6560.dtb
+dtb-$(CONFIG_ARCH_QCOM)        += sdm450-motorola-ali.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sdm630-sony-xperia-ganges-kirin.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sdm630-sony-xperia-nile-discovery.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += sdm630-sony-xperia-nile-pioneer.dtb

diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
new file mode 100644 (file)
index 0000000..362be57
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Julian Braha <julianbraha@gmail.com>
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+       model = "Motorola Moto G6";
+       compatible = "motorola,ali", "qcom,sdm450";
+       chassis-type = "handset";
+       qcom,msm-id = <338 0>;
+       qcom,board-id = <0x43 0xc200>;
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               key-volume-up {
+                       label = "volume_up";
+                       gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEUP>;
+               };
+       };
+
+       reserved-memory {
+               qseecom_mem: qseecom@84300000 {
+                       reg = <0x0 0x84300000 0x0 0x2000000>;
+                       no-map;
+               };
+
+               ramoops@ef000000 {
+                       compatible = "ramoops";
+                       reg = <0x0 0xef000000 0x0 0xc0000>;
+                       console-size = <0x40000>;
+               };
+       };
+
+       vph_pwr: vph-pwr-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vph_pwr";
+               regulator-always-on;
+               regulator-boot-on;
+       };
+};
+
+&hsusb_phy {
+       vdd-supply = <&pm8953_l3>;
+       vdda-pll-supply = <&pm8953_l7>;
+       vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+       status = "okay";
+};
+
+&i2c_3 {
+       status = "okay";
+
+       touchscreen@38 {
+               compatible = "edt,edt-ft5406";
+               reg = <0x38>;
+               interrupt-parent = <&tlmm>;
+               interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+               vcc-supply = <&pm8953_l10>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+               reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+               touchscreen-size-x = <1080>;
+               touchscreen-size-y = <2160>;
+       };
+};
+
+&pm8953_resin {
+       linux,code = <KEY_VOLUMEDOWN>;
+       status = "okay";
+};
+
+&pmi8950_wled {
+       qcom,num-strings = <3>;
+       qcom,external-pfet;
+       qcom,cabc;
+
+       status = "okay";
+};
+
+&rpm_requests {
+       regulators {
+               compatible = "qcom,rpm-pm8953-regulators";
+
+               vdd_s1-supply = <&vph_pwr>;
+               vdd_s2-supply = <&vph_pwr>;
+               vdd_s3-supply = <&vph_pwr>;
+               vdd_s4-supply = <&vph_pwr>;
+               vdd_s5-supply = <&vph_pwr>;
+               vdd_s6-supply = <&vph_pwr>;
+               vdd_s7-supply = <&vph_pwr>;
+               vdd_l1-supply = <&pm8953_s3>;
+               vdd_l2_l3-supply = <&pm8953_s3>;
+               vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+               vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+               vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+               pm8953_s1: s1 {
+                       regulator-min-microvolt = <795000>;
+                       regulator-max-microvolt = <1081000>;
+               };
+
+               pm8953_s3: s3 {
+                       regulator-min-microvolt = <1224000>;
+                       regulator-max-microvolt = <1224000>;
+               };
+
+               pm8953_s4: s4 {
+                       regulator-min-microvolt = <1900000>;
+                       regulator-max-microvolt = <2050000>;
+               };
+
+               pm8953_l1: l1 {
+                       regulator-min-microvolt = <1000000>;
+                       regulator-max-microvolt = <1100000>;
+               };
+
+               pm8953_l2: l2 {
+                       regulator-min-microvolt = <975000>;
+                       regulator-max-microvolt = <1225000>;
+               };
+
+               pm8953_l3: l3 {
+                       regulator-min-microvolt = <925000>;
+                       regulator-max-microvolt = <925000>;
+               };
+
+               pm8953_l5: l5 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8953_l6: l6 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8953_l7: l7 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1900000>;
+               };
+
+               pm8953_l8: l8 {
+                       regulator-min-microvolt = <2900000>;
+                       regulator-max-microvolt = <2900000>;
+               };
+
+               pm8953_l9: l9 {
+                       regulator-min-microvolt = <3000000>;
+                       regulator-max-microvolt = <3300000>;
+               };
+
+               pm8953_l10: l10 {
+                       regulator-min-microvolt = <2850000>;
+                       regulator-max-microvolt = <2850000>;
+               };
+
+               pm8953_l11: l11 {
+                       regulator-min-microvolt = <2950000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8953_l12: l12 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <2950000>;
+               };
+
+               pm8953_l13: l13 {
+                       regulator-min-microvolt = <3125000>;
+                       regulator-max-microvolt = <3125000>;
+               };
+
+               pm8953_l16: l16 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+               };
+
+               pm8953_l17: l17 {
+                       regulator-min-microvolt = <2850000>;
+                       regulator-max-microvolt = <2850000>;
+               };
+
+               pm8953_l19: l19 {
+                       regulator-min-microvolt = <1200000>;
+                       regulator-max-microvolt = <1350000>;
+               };
+
+               pm8953_l22: l22 {
+                       regulator-min-microvolt = <2800000>;
+                       regulator-max-microvolt = <2850000>;
+               };
+
+               pm8953_l23: l23 {
+                       regulator-min-microvolt = <975000>;
+                       regulator-max-microvolt = <1225000>;
+               };
+       };
+};
+
+&sdhc_1 {
+       vmmc-supply = <&pm8953_l8>;
+       vqmmc-supply = <&pm8953_l5>;
+
+       status = "okay";
+};
+
+&sdhc_2 {
+       vmmc-supply = <&pm8953_l11>;
+       vqmmc-supply = <&pm8953_l12>;
+
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+       pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+       status = "okay";
+};
+
+&tlmm {
+       gpio-reserved-ranges = <95 5>, <111 1>, <126 1>;
+
+       ts_int_active: ts-int-active-state {
+               pins = "gpio65";
+               function = "gpio";
+               drive-strength = <8>;
+               bias-pull-up;
+       };
+
+       ts_reset_active: ts-reset-active-state {
+               pins = "gpio64";
+               function = "gpio";
+               drive-strength = <0x08>;
+               bias-pull-up;
+       };
+};
+
+&usb3 {
+       status = "okay";
+};
+
+&usb3_dwc3 {
+       dr_mode = "peripheral";
+};