ARM: dts: stm32: Add IoT Box board support

IoT Box is an IoT gateway device based on Stinger96 board powered by
STM32MP1 SoC, designed and manufactured by Shiratech Solutions. This
device makes use of Stinger96 board by having it as a base board with
one additional mezzanine on top.

Following are the features exposed by this device in addition to the
Stinger96 board:

* WiFi/BT
* CCS811 VOC sensor
* 2x Digital microphones IM69D130
* 12x WS2812B LEDs

Following peripherals are tested and known to work:

* WiFi/BT
* CCS811

More information about this device can be found in Shiratech website:
https://www.shiratech-solutions.com/products/iot-box/

Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 966b81dfffd6d089e343072991c339848d2ffaeb..455ec6eb6303b7f8736ee91830dd5d83b419256e 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1030,6 +1030,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
        stm32h743i-disco.dtb \
        stm32mp157a-avenger96.dtb \
        stm32mp157a-dk1.dtb \
+       stm32mp157a-iot-box.dtb \
        stm32mp157a-stinger96.dtb \
        stm32mp157c-dhcom-pdk2.dtb \
        stm32mp157c-dk2.dtb \

diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
new file mode 100644 (file)
index 0000000..70f394b
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+#include "stm32mp157a-stinger96.dtsi"
+
+/ {
+       model = "Shiratech STM32MP157A IoT Box";
+       compatible = "shiratech,stm32mp157a-iot-box", "st,stm32mp157";
+
+       wlan_pwr: regulator-wlan {
+               compatible = "regulator-fixed";
+
+               regulator-name = "wl-reg";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&i2c2 {
+       ccs811@5b {
+               compatible = "ams,ccs811";
+               reg = <0x5b>;
+               wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>;
+               reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
+       };
+};
+
+/* WiFi */
+&sdmmc2 {
+       pinctrl-names = "default", "opendrain", "sleep";
+       pinctrl-0 = <&sdmmc2_b4_pins_a>;
+       pinctrl-1 = <&sdmmc2_b4_od_pins_b>;
+       pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+       broken-cd;
+       non-removable;
+       st,neg-edge;
+       bus-width = <1>;
+       vmmc-supply = <&wlan_pwr>;
+       status = "okay";
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+       brcmf: bcrmf@1 {
+               reg = <1>;
+               compatible = "brcm,bcm4329-fmac";
+       };
+};
+
+/* Bluetooth */
+&uart4 {
+       /* Note: HW flow control is broken, hence using custom CTS/RTS gpios */
+       /delete-property/st,hw-flow-ctrl;
+       cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+       rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>;
+       status = "okay";
+
+       bluetooth {
+               shutdown-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
+               compatible = "brcm,bcm43438-bt";
+               max-speed = <115200>;
+       };
+};