ARM: dts: rockchip: Add #clock-cells value for rk805

Based on a brief discussion on the mailing list it was determined that
clock-cells should be a required parameter in the event that a consumer
of the clock gets added in an overlay.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220303203958.4904-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index f62c9f7af79db923324bcfedce1acebca8f994c9..0c99a5934ebf29317bbd132865791a9b30dbbe83 100644 (file)
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -72,6 +72,7 @@
                interrupt-parent = <&gpio0>;
                interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
                rockchip,system-power-controller;
+               #clock-cells = <0>;
 
                vcc1-supply = <&vcc_sys>;
                vcc2-supply = <&vcc_sys>;

diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index fe5fc9bf75c9980d769806a8ed2f3b0d3f0507de..46cad7cb94bf75a26dcbd86cde3fd29217f60f17 100644 (file)
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -85,6 +85,7 @@
                interrupt-parent = <&gpio0>;
                interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
                rockchip,system-power-controller;
+               #clock-cells = <0>;
 
                vcc1-supply = <&vcc_sys>;
                vcc2-supply = <&vcc_sys>;