#size-cells = <1>;
interrupt-parent = <&intc>;
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mpss_region: mpss@8000000 {
- reg = <0x08000000 0x5100000>;
- no-map;
- };
-
- mba_region: mba@d100000 {
- reg = <0x0d100000 0x100000>;
- no-map;
- };
-
- wcnss_region: wcnss@d200000 {
- reg = <0x0d200000 0xa00000>;
- no-map;
- };
-
- adsp_region: adsp@dc00000 {
- reg = <0x0dc00000 0x1900000>;
- no-map;
- };
-
- venus@f500000 {
- reg = <0x0f500000 0x500000>;
- no-map;
- };
-
- smem_region: smem@fa00000 {
- reg = <0xfa00000 0x200000>;
- no-map;
- };
-
- tz@fc00000 {
- reg = <0x0fc00000 0x160000>;
- no-map;
- };
-
- rfsa@fd60000 {
- reg = <0x0fd60000 0x20000>;
- no-map;
+ clocks {
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
};
- rmtfs@fd80000 {
- compatible = "qcom,rmtfs-mem";
- reg = <0x0fd80000 0x180000>;
- no-map;
-
- qcom,client-id = <1>;
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
};
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm";
+ clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ };
+ };
+
memory {
device_type = "memory";
reg = <0x0 0x0>;
};
- thermal-zones {
- cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 5>;
-
- trips {
- cpu_alert0: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit0: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 6>;
-
- trips {
- cpu_alert1: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit1: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ pmu {
+ compatible = "qcom,krait-pmu";
+ interrupts = <GIC_PPI 7 0xf04>;
+ };
- thermal-sensors = <&tsens 7>;
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- trips {
- cpu_alert2: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit2: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
+ mpss_region: mpss@8000000 {
+ reg = <0x08000000 0x5100000>;
+ no-map;
};
- cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 8>;
-
- trips {
- cpu_alert3: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit3: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
+ mba_region: mba@d100000 {
+ reg = <0x0d100000 0x100000>;
+ no-map;
};
- q6-dsp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 1>;
-
- trips {
- q6_dsp_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ wcnss_region: wcnss@d200000 {
+ reg = <0x0d200000 0xa00000>;
+ no-map;
};
- modemtx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 2>;
-
- trips {
- modemtx_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ adsp_region: adsp@dc00000 {
+ reg = <0x0dc00000 0x1900000>;
+ no-map;
};
- video-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 3>;
-
- trips {
- video_alert0: trip-point0 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ venus_region: memory@f500000 {
+ reg = <0x0f500000 0x500000>;
+ no-map;
};
- wlan-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 4>;
-
- trips {
- wlan_alert0: trip-point0 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ smem_region: smem@fa00000 {
+ reg = <0xfa00000 0x200000>;
+ no-map;
};
- gpu-top-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 9>;
-
- trips {
- gpu1_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ tz_region: memory@fc00000 {
+ reg = <0x0fc00000 0x160000>;
+ no-map;
};
- gpu-bottom-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 10>;
-
- trips {
- gpu2_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ rfsa_mem: memory@fd60000 {
+ reg = <0x0fd60000 0x20000>;
+ no-map;
};
- };
-
- cpu-pmu {
- compatible = "qcom,krait-pmu";
- interrupts = <GIC_PPI 7 0xf04>;
- };
- clocks {
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- };
+ rmtfs@fd80000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0fd80000 0x180000>;
+ no-map;
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
+ qcom,client-id = <1>;
};
};
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 2 0xf08>,
- <GIC_PPI 3 0xf08>,
- <GIC_PPI 4 0xf08>,
- <GIC_PPI 1 0xf08>;
- clock-frequency = <19200000>;
- };
-
smem {
compatible = "qcom,smem";
};
};
- firmware {
- scm {
- compatible = "qcom,scm";
- clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
- clock-names = "core", "bus", "iface";
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm_requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+ };
};
};
reg = <0xf9011000 0x1000>;
};
- qfprom: qfprom@fc4bc000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "qcom,qfprom";
- reg = <0xfc4bc000 0x1000>;
- tsens_calib: calib@d0 {
- reg = <0xd0 0x18>;
- };
- tsens_backup: backup@440 {
- reg = <0x440 0x10>;
- };
- };
-
- tsens: thermal-sensor@fc4a9000 {
- compatible = "qcom,msm8974-tsens";
- reg = <0xfc4a9000 0x1000>, /* TM */
- <0xfc4a8000 0x1000>; /* SROT */
- nvmem-cells = <&tsens_calib>, <&tsens_backup>;
- nvmem-cell-names = "calib", "calib_backup";
- #qcom,sensors = <11>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
- #thermal-sensor-cells = <1>;
- };
-
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
};
- restart@fc4ab000 {
- compatible = "qcom,pshold";
- reg = <0xfc4ab000 0x4>;
- };
-
- gcc: clock-controller@fc400000 {
- compatible = "qcom,gcc-msm8974";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0xfc400000 0x4000>;
- };
-
- tcsr: syscon@fd4a0000 {
- compatible = "syscon";
- reg = <0xfd4a0000 0x10000>;
- };
-
- tcsr_mutex_block: syscon@fd484000 {
- compatible = "syscon";
- reg = <0xfd484000 0x2000>;
- };
-
- mmcc: clock-controller@fd8c0000 {
- compatible = "qcom,mmcc-msm8974";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0xfd8c0000 0x6000>;
- };
-
- tcsr_mutex: tcsr-mutex {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_block 0 0x80>;
-
- #hwlock-cells = <1>;
- };
-
- rpm_msg_ram: memory@fc428000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0xfc428000 0x4000>;
- };
-
- blsp1_uart1: serial@f991d000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991d000 0x1000>;
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- blsp1_uart2: serial@f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- blsp2_uart1: serial@f995d000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf995d000 0x1000>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
- clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- blsp2_uart2: serial@f995e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf995e000 0x1000>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- blsp2_uart4: serial@f9960000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf9960000 0x1000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
sdhc_1: sdhci@f9824900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
<&gcc GCC_SDCC2_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
- bus-width = <4>;
-
- status = "disabled";
- };
-
- otg: usb@f9a55000 {
- compatible = "qcom,ci-hdrc";
- reg = <0xf9a55000 0x200>,
- <0xf9a55200 0x200>;
- interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_USB_HS_AHB_CLK>,
- <&gcc GCC_USB_HS_SYSTEM_CLK>;
- clock-names = "iface", "core";
- assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
- assigned-clock-rates = <75000000>;
- resets = <&gcc GCC_USB_HS_BCR>;
- reset-names = "core";
- phy_type = "ulpi";
- dr_mode = "otg";
- ahb-burst-config = <0>;
- phy-names = "usb-phy";
- status = "disabled";
- #reset-cells = <1>;
-
- ulpi {
- usb_hs1_phy: phy@a {
- compatible = "qcom,usb-hs-phy-msm8974",
- "qcom,usb-hs-phy";
- #phy-cells = <0>;
- clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
- clock-names = "ref", "sleep";
- resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
- reset-names = "phy", "por";
- status = "disabled";
- };
-
- usb_hs2_phy: phy@b {
- compatible = "qcom,usb-hs-phy-msm8974",
- "qcom,usb-hs-phy";
- #phy-cells = <0>;
- clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
- clock-names = "ref", "sleep";
- resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
- reset-names = "phy", "por";
- status = "disabled";
- };
- };
- };
-
- rng@f9bff000 {
- compatible = "qcom,prng";
- reg = <0xf9bff000 0x200>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
- };
-
- remoteproc_mss: remoteproc@fc880000 {
- compatible = "qcom,msm8974-mss-pil";
- reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
- reg-names = "qdsp6", "rmb";
-
- interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
- clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
- <&gcc GCC_MSS_CFG_AHB_CLK>,
- <&gcc GCC_BOOT_ROM_AHB_CLK>,
- <&xo_board>;
- clock-names = "iface", "bus", "mem", "xo";
-
- resets = <&gcc GCC_MSS_RESTART>;
- reset-names = "mss_restart";
-
- cx-supply = <&pm8841_s2>;
- mss-supply = <&pm8841_s3>;
- mx-supply = <&pm8841_s1>;
- pll-supply = <&pm8941_l12>;
-
- qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
-
- qcom,smem-states = <&modem_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- mba {
- memory-region = <&mba_region>;
- };
-
- mpss {
- memory-region = <&mpss_region>;
- };
-
- smd-edge {
- interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 12>;
- qcom,smd-edge = <0>;
-
- label = "modem";
- };
- };
-
- pronto: remoteproc@fb21b000 {
- compatible = "qcom,pronto-v2-pil", "qcom,pronto";
- reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
- reg-names = "ccu", "dxe", "pmu";
-
- memory-region = <&wcnss_region>;
-
- interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
- vddpx-supply = <&pm8941_s3>;
-
- qcom,smem-states = <&wcnss_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- iris {
- compatible = "qcom,wcn3680";
-
- clocks = <&rpmcc RPM_SMD_CXO_A2>;
- clock-names = "xo";
-
- vddxo-supply = <&pm8941_l6>;
- vddrfa-supply = <&pm8941_l11>;
- vddpa-supply = <&pm8941_l19>;
- vdddig-supply = <&pm8941_s3>;
- };
-
- smd-edge {
- interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 17>;
- qcom,smd-edge = <6>;
-
- wcnss {
- compatible = "qcom,wcnss";
- qcom,smd-channels = "WCNSS_CTRL";
- status = "disabled";
-
- qcom,mmio = <&pronto>;
-
- bluetooth {
- compatible = "qcom,wcnss-bt";
- };
-
- wifi {
- compatible = "qcom,wcnss-wlan";
+ bus-width = <4>;
- interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "tx", "rx";
+ status = "disabled";
+ };
- qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
- qcom,smem-state-names = "tx-enable", "tx-rings-empty";
- };
- };
- };
+ blsp1_uart1: serial@f991d000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991d000 0x1000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
};
- tlmm: pinctrl@fd510000 {
- compatible = "qcom,msm8974-pinctrl";
- reg = <0xfd510000 0x4000>;
- gpio-controller;
- gpio-ranges = <&tlmm 0 0 146>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ blsp1_uart2: serial@f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
};
blsp1_i2c1: i2c@f9923000 {
#size-cells = <0>;
};
+ blsp2_dma: dma-controller@f9944000 {
+ compatible = "qcom,bam-v1.4.0";
+ reg = <0xf9944000 0x19000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp2_uart1: serial@f995d000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf995d000 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
+ clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp2_uart2: serial@f995e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf995e000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp2_uart4: serial@f9960000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf9960000 0x1000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp2_i2c2: i2c@f9964000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
#size-cells = <0>;
};
- spmi_bus: spmi@fc4cf000 {
- compatible = "qcom,spmi-pmic-arb";
- reg-names = "core", "intr", "cnfg";
- reg = <0xfc4cf000 0x1000>,
- <0xfc4cb000 0x1000>,
- <0xfc4ca000 0x1000>;
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
+ otg: usb@f9a55000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0xf9a55000 0x200>,
+ <0xf9a55200 0x200>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+ assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ assigned-clock-rates = <75000000>;
+ resets = <&gcc GCC_USB_HS_BCR>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ dr_mode = "otg";
+ ahb-burst-config = <0>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ #reset-cells = <1>;
+
+ ulpi {
+ usb_hs1_phy: phy@a {
+ compatible = "qcom,usb-hs-phy-msm8974",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+ reset-names = "phy", "por";
+ status = "disabled";
+ };
+
+ usb_hs2_phy: phy@b {
+ compatible = "qcom,usb-hs-phy-msm8974",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
+ reset-names = "phy", "por";
+ status = "disabled";
+ };
+ };
};
- blsp2_dma: dma-controller@f9944000 {
- compatible = "qcom,bam-v1.4.0";
- reg = <0xf9944000 0x19000>;
- interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
+ rng@f9bff000 {
+ compatible = "qcom,prng";
+ reg = <0xf9bff000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
};
- etr@fc322000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0xfc322000 0x1000>;
+ pronto: remoteproc@fb21b000 {
+ compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+ reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
- clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ memory-region = <&wcnss_region>;
- in-ports {
- port {
- etr_in: endpoint {
- remote-endpoint = <&replicator_out0>;
- };
- };
- };
- };
+ interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
- tpiu@fc318000 {
- compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0xfc318000 0x1000>;
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
- clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ status = "disabled";
- in-ports {
- port {
- tpiu_in: endpoint {
- remote-endpoint = <&replicator_out1>;
- };
- };
+ iris {
+ compatible = "qcom,wcn3680";
+
+ clocks = <&rpmcc RPM_SMD_CXO_A2>;
+ clock-names = "xo";
};
- };
- replicator@fc31c000 {
- compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
- reg = <0xfc31c000 0x1000>;
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
- clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
- out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+ status = "disabled";
- port@0 {
- reg = <0>;
- replicator_out0: endpoint {
- remote-endpoint = <&etr_in>;
- };
- };
- port@1 {
- reg = <1>;
- replicator_out1: endpoint {
- remote-endpoint = <&tpiu_in>;
+ qcom,mmio = <&pronto>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
};
- };
- };
- in-ports {
- port {
- replicator_in: endpoint {
- remote-endpoint = <&etf_out>;
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable",
+ "tx-rings-empty";
};
};
};
};
};
- funnel@fc31b000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0xfc31b000 0x1000>;
+ tpiu@fc318000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0xfc318000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /*
- * Not described input ports:
- * 0 - connected trought funnel to Audio, Modem and
- * Resource and Power Manager CPU's
- * 2...7 - not-connected
- */
- port@1 {
- reg = <1>;
- merger_in1: endpoint {
- remote-endpoint = <&funnel1_out>;
- };
- };
- };
-
- out-ports {
port {
- merger_out: endpoint {
- remote-endpoint = <&etf_in>;
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
};
- };
+ };
};
};
};
};
- funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
+ funnel@fc31b000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0xfc345000 0x1000>;
+ reg = <0xfc31b000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
#address-cells = <1>;
#size-cells = <0>;
+ /*
+ * Not described input ports:
+ * 0 - connected trought funnel to Audio, Modem and
+ * Resource and Power Manager CPU's
+ * 2...7 - not-connected
+ */
+ port@1 {
+ reg = <1>;
+ merger_in1: endpoint {
+ remote-endpoint = <&funnel1_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ merger_out: endpoint {
+ remote-endpoint = <&etf_in>;
+ };
+ };
+ };
+ };
+
+ replicator@fc31c000 {
+ compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+ reg = <0xfc31c000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@0 {
reg = <0>;
- kpss_in0: endpoint {
- remote-endpoint = <&etm0_out>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etr_in>;
};
};
port@1 {
reg = <1>;
- kpss_in1: endpoint {
- remote-endpoint = <&etm1_out>;
- };
- };
- port@2 {
- reg = <2>;
- kpss_in2: endpoint {
- remote-endpoint = <&etm2_out>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
};
};
- port@3 {
- reg = <3>;
- kpss_in3: endpoint {
- remote-endpoint = <&etm3_out>;
+ };
+
+ in-ports {
+ port {
+ replicator_in: endpoint {
+ remote-endpoint = <&etf_out>;
};
};
};
+ };
- out-ports {
+ etr@fc322000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0xfc322000 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
port {
- kpss_out: endpoint {
- remote-endpoint = <&funnel1_in5>;
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
};
};
};
};
};
- ocmem@fdd00000 {
- compatible = "qcom,msm8974-ocmem";
- reg = <0xfdd00000 0x2000>,
- <0xfec00000 0x180000>;
- reg-names = "ctrl",
- "mem";
- clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
- <&mmcc OCMEMCX_OCMEMNOC_CLK>;
- clock-names = "core",
- "iface";
+ /* KPSS funnel, only 4 inputs are used */
+ funnel@fc345000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0xfc345000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- gmu_sram: gmu-sram@0 {
- reg = <0x0 0x100000>;
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ kpss_in0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ kpss_in1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ kpss_in2: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@3 {
+ reg = <3>;
+ kpss_in3: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ kpss_out: endpoint {
+ remote-endpoint = <&funnel1_in5>;
+ };
+ };
};
};
+ gcc: clock-controller@fc400000 {
+ compatible = "qcom,gcc-msm8974";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0xfc400000 0x4000>;
+ };
+
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
+ };
+
bimc: interconnect@fc380000 {
reg = <0xfc380000 0x6a000>;
compatible = "qcom,msm8974-bimc";
<&rpmcc RPM_SMD_CNOC_A_CLK>;
};
- gpu: adreno@fdb00000 {
- status = "disabled";
+ tsens: thermal-sensor@fc4a9000 {
+ compatible = "qcom,msm8974-tsens";
+ reg = <0xfc4a9000 0x1000>, /* TM */
+ <0xfc4a8000 0x1000>; /* SROT */
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ #qcom,sensors = <11>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+ #thermal-sensor-cells = <1>;
+ };
- compatible = "qcom,adreno-330.1",
- "qcom,adreno";
- reg = <0xfdb00000 0x10000>;
- reg-names = "kgsl_3d0_reg_memory";
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "kgsl_3d0_irq";
- clock-names = "core",
- "iface",
- "mem_iface";
- clocks = <&mmcc OXILI_GFX3D_CLK>,
- <&mmcc OXILICX_AHB_CLK>,
- <&mmcc OXILICX_AXI_CLK>;
- sram = <&gmu_sram>;
- power-domains = <&mmcc OXILICX_GDSC>;
- operating-points-v2 = <&gpu_opp_table>;
+ restart@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
- interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
- <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
- interconnect-names = "gfx-mem",
- "ocmem";
+ qfprom: qfprom@fc4bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,qfprom";
+ reg = <0xfc4bc000 0x1000>;
+ tsens_calib: calib@d0 {
+ reg = <0xd0 0x18>;
+ };
+ tsens_backup: backup@440 {
+ reg = <0x440 0x10>;
+ };
+ };
- // iommus = <&gpu_iommu 0>;
+ spmi_bus: spmi@fc4cf000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg-names = "core", "intr", "cnfg";
+ reg = <0xfc4cf000 0x1000>,
+ <0xfc4cb000 0x1000>,
+ <0xfc4ca000 0x1000>;
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
- gpu_opp_table: opp_table {
- compatible = "operating-points-v2";
+ remoteproc_mss: remoteproc@fc880000 {
+ compatible = "qcom,msm8974-mss-pil";
+ reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+ reg-names = "qdsp6", "rmb";
- opp-320000000 {
- opp-hz = /bits/ 64 <320000000>;
- };
+ interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- };
+ clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ mba {
+ memory-region = <&mba_region>;
+ };
+
+ mpss {
+ memory-region = <&mpss_region>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 12>;
+ qcom,smd-edge = <0>;
+
+ label = "modem";
+ };
+ };
+
+ tcsr_mutex_block: syscon@fd484000 {
+ compatible = "syscon";
+ reg = <0xfd484000 0x2000>;
+ };
+
+ tcsr: syscon@fd4a0000 {
+ compatible = "syscon";
+ reg = <0xfd4a0000 0x10000>;
+ };
+
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,msm8974-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 146>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ };
- opp-27000000 {
- opp-hz = /bits/ 64 <27000000>;
- };
- };
+ mmcc: clock-controller@fd8c0000 {
+ compatible = "qcom,mmcc-msm8974";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0xfd8c0000 0x6000>;
};
mdss: mdss@fd900000 {
};
};
+ gpu: adreno@fdb00000 {
+ compatible = "qcom,adreno-330.1", "qcom,adreno";
+ reg = <0xfdb00000 0x10000>;
+ reg-names = "kgsl_3d0_reg_memory";
+
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+
+ clocks = <&mmcc OXILI_GFX3D_CLK>,
+ <&mmcc OXILICX_AHB_CLK>,
+ <&mmcc OXILICX_AXI_CLK>;
+ clock-names = "core", "iface", "mem_iface";
+
+ sram = <&gmu_sram>;
+ power-domains = <&mmcc OXILICX_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+
+ interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
+ <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
+ interconnect-names = "gfx-mem", "ocmem";
+
+ // iommus = <&gpu_iommu 0>;
+
+ status = "disabled";
+
+ gpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-320000000 {
+ opp-hz = /bits/ 64 <320000000>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+
+ opp-27000000 {
+ opp-hz = /bits/ 64 <27000000>;
+ };
+ };
+ };
+
+ ocmem@fdd00000 {
+ compatible = "qcom,msm8974-ocmem";
+ reg = <0xfdd00000 0x2000>,
+ <0xfec00000 0x180000>;
+ reg-names = "ctrl", "mem";
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+ clock-names = "core", "iface";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gmu_sram: gmu-sram@0 {
+ reg = <0x0 0x100000>;
+ };
+ };
+
remoteproc_adsp: remoteproc@fe200000 {
compatible = "qcom,msm8974-adsp-pil";
reg = <0xfe200000 0x100>;
};
};
- smd {
- compatible = "qcom,smd";
+ tcsr_mutex: tcsr-mutex {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_block 0 0x80>;
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
+ #hwlock-cells = <1>;
+ };
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8974";
- qcom,smd-channels = "rpm_requests";
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
- #clock-cells = <1>;
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ q6_dsp_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modemtx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ modemtx_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ video_alert0: trip-point0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ wlan_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "hot";
};
+ };
+ };
+
+ gpu-top-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 9>;
- pm8841-regulators {
- compatible = "qcom,rpm-pm8841-regulators";
-
- pm8841_s1: s1 {};
- pm8841_s2: s2 {};
- pm8841_s3: s3 {};
- pm8841_s4: s4 {};
- pm8841_s5: s5 {};
- pm8841_s6: s6 {};
- pm8841_s7: s7 {};
- pm8841_s8: s8 {};
+ trips {
+ gpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
};
+ };
+ };
+
+ gpu-bottom-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 10>;
- pm8941-regulators {
- compatible = "qcom,rpm-pm8941-regulators";
-
- pm8941_s1: s1 {};
- pm8941_s2: s2 {};
- pm8941_s3: s3 {};
-
- pm8941_l1: l1 {};
- pm8941_l2: l2 {};
- pm8941_l3: l3 {};
- pm8941_l4: l4 {};
- pm8941_l5: l5 {};
- pm8941_l6: l6 {};
- pm8941_l7: l7 {};
- pm8941_l8: l8 {};
- pm8941_l9: l9 {};
- pm8941_l10: l10 {};
- pm8941_l11: l11 {};
- pm8941_l12: l12 {};
- pm8941_l13: l13 {};
- pm8941_l14: l14 {};
- pm8941_l15: l15 {};
- pm8941_l16: l16 {};
- pm8941_l17: l17 {};
- pm8941_l18: l18 {};
- pm8941_l19: l19 {};
- pm8941_l20: l20 {};
- pm8941_l21: l21 {};
- pm8941_l22: l22 {};
- pm8941_l23: l23 {};
- pm8941_l24: l24 {};
-
- pm8941_lvs1: lvs1 {};
- pm8941_lvs2: lvs2 {};
- pm8941_lvs3: lvs3 {};
+ trips {
+ gpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
};
};
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 2 0xf08>,
+ <GIC_PPI 3 0xf08>,
+ <GIC_PPI 4 0xf08>,
+ <GIC_PPI 1 0xf08>;
+ clock-frequency = <19200000>;
+ };
+
vreg_boost: vreg-boost {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&boost_bypass_n_pin>;
};
+
vreg_vph_pwr: vreg-vph-pwr {
compatible = "regulator-fixed";
regulator-name = "vph-pwr";
projects / linux.git / commitdiff