ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces

Setting the vmmc supplies is crucial since otherwise the supplying
regulators get disabled and the SD interfaces are no longer powered
which leads to system failures if the system is booted from that SD
interface.

Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module")
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 7a1e53195785b3e2d1c6a13ec0cb2c432625c40f..f28a96fcf23e8fec54e0b2885dfa281a15141d22 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -433,6 +433,7 @@
        pinctrl-0 = <&pinctrl_usdhc2>;
        cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+       vmmc-supply = <&vdd_sd1_reg>;
        status = "disabled";
 };
 
@@ -442,5 +443,6 @@
                     &pinctrl_usdhc3_cdwp>;
        cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+       vmmc-supply = <&vdd_sd0_reg>;
        status = "disabled";
 };