arm64: dts: renesas: rzg2ul-smarc: Enable CRU, CSI support

Enable CRU and CSI on RZ/G2UL SMARC EVK and tie the CSI to the OV5645
sensor using a Device Tree overlay.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213141300.159847-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 4c5ac5f02829ff58c2f7bd94814cd242fa743d38..5f3e0e61d78d130cfb68f836d8a0800324382a2d 100644 (file)
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -108,7 +108,10 @@ r8a779m5-salvator-xs-panel-aa104xd12-dtbs := r8a779m5-salvator-xs.dtb salvator-p
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs-panel-aa104xd12.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-cru-csi-ov5645.dtbo
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo
+r9a07g043u11-smarc-cru-csi-ov5645-dtbs := r9a07g043u11-smarc.dtb r9a07g043u11-smarc-cru-csi-ov5645.dtbo
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-cru-csi-ov5645.dtb
 r9a07g043u11-smarc-pmod-dtbs := r9a07g043u11-smarc.dtb r9a07g043-smarc-pmod.dtbo
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-pmod.dtb
 

diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso
new file mode 100644 (file)
index 0000000..b41bb4b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/G2UL SMARC EVK with OV5645 camera
+ * connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#define OV5645_PARENT_I2C i2c0
+#include "rz-smarc-cru-csi-ov5645.dtsi"
+
+&ov5645 {
+       enable-gpios = <&pinctrl RZG2L_GPIO(4, 4) GPIO_ACTIVE_HIGH>;
+       reset-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_LOW>;
+};