arm64: dts: qcom: use generic node name for Bluetooth

Node names should be generic (as Devicetree spec mandates), so use
"bluetooth" for BT node.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-1-krzysztof.kozlowski@linaro.org

diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 5b47b8de69da69d735241f73c35fcf71c8e10b66..2acfed28e3cb4b662dd40a0b0b0bfe48bb244d61 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -229,7 +229,7 @@
        status = "okay";
        label = "QCA_UART";
 
-       bluetooth: qca6174a {
+       bluetooth: bluetooth {
                compatible = "qcom,qca6174-bt";
 
                enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 774f9d45f0515d8281de98c3b9452bd37df39e1a..6ea8dd7d3e01d30e4db1dc56fc8a4ef31b802f3c 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -430,7 +430,7 @@
        pinctrl-names = "default", "sleep";
        pinctrl-1 = <&qup_uart3_sleep>;
 
-       bluetooth: wcn3990-bt {
+       bluetooth: bluetooth {
                compatible = "qcom,wcn3990-bt";
                vddio-supply = <&vreg_l10a_1p8>;
                vddxo-supply = <&vreg_l1c_1p8>;

diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index a780751553107d381b149bc9faeca106b51e5ed3..e19178c1ec44e5dc8b98e03cacbfd197f539b151 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -862,7 +862,7 @@ ap_ts_i2c: &i2c14 {
 
        pinctrl-0 = <&qup_uart6_4pin>;
 
-       bluetooth: wcn3990-bt {
+       bluetooth: bluetooth {
                compatible = "qcom,wcn3990-bt";
                vddio-supply = <&src_pp1800_s4a>;
                vddxo-supply = <&pp1800_l7a_wcn3990>;