ARM: dts: omap: align UART node name with bindings

Bindings expect UART/serial node names to be "serial".

Link: https://lore.kernel.org/r/20230123151531.369419-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
index 1e96c865d41dc32da24a158208221a7a98d70abe..8adc0ef01f6c6ecd582383556f422ccebf8cc20c 100644 (file)
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -14,7 +14,7 @@
         * they probably share the same GPIO IRQ
         * REVISIT: Add timing support from slls644g.pdf
         */
-       uart@3,0 {
+       serial@3,0 {
                compatible = "ns16550a";
                reg = <3 0 8>;  /* CS3, offset 0, IO size 8 */
                bank-width = <2>;
@@ -50,7 +50,7 @@
                gpmc,wr-data-mux-bus-ns = <45>;
                gpmc,wr-access-ns = <145>;
        };
-       uart@3,1 {
+       serial@3,1 {
                compatible = "ns16550a";
                reg = <3 0x100 8>;      /* CS3, offset 0x100, IO size 8 */
                bank-width = <2>;
@@ -61,7 +61,7 @@
                clock-frequency = <1843200>;
                current-speed = <115200>;
        };
-       uart@3,2 {
+       serial@3,2 {
                compatible = "ns16550a";
                reg = <3 0x200 8>;      /* CS3, offset 0x200, IO size 8 */
                bank-width = <2>;
@@ -72,7 +72,7 @@
                clock-frequency = <1843200>;
                current-speed = <115200>;
        };
-       uart@3,3 {
+       serial@3,3 {
                compatible = "ns16550a";
                reg = <3 0x300 8>;      /* CS3, offset 0x300, IO size 8 */
                bank-width = <2>;