ARM: dts: imx6qdl-sabreauto: Use #pwm-cells = <3> for imx27-pwm device

The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warnings:

	arch/arm/boot/dts/nxp/imx/imx6dl-sabreauto.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
index 51517e27418cf01bb775d4b4c37793ca8f645c93..6656e2e762a1a4e32e6d91d77a38ff9ada98628d 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -153,7 +153,7 @@
 
        backlight {
                compatible = "pwm-backlight";
-               pwms = <&pwm3 0 5000000>;
+               pwms = <&pwm3 0 5000000 0>;
                brightness-levels = <0 4 8 16 32 64 128 255>;
                default-brightness-level = <7>;
                status = "okay";
@@ -802,7 +802,6 @@
 };
 
 &pwm3 {
-       #pwm-cells = <2>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pwm3>;
        status = "okay";