The vchiq_connected.[ch] just implements two function:
- vchiq_add_connected_callback()
- vchiq_call_connected_callbacks()
for the deferred vchiq callbacks. Those can easily live in
vchiq_arm.[ch], hence move them. This allows making the
vchiq_call_connected_callbacks() function static.
The move doesn't copy over MAX_CALLBACKS because it is the same as
VCHIQ_DRV_MAX_CALLBACKS. Hence, it now being used in
vchiq_add_connected_callback().
No functional changes intended in this patch.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-6-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
interface/vchiq_arm/vchiq_arm.o \
interface/vchiq_arm/vchiq_bus.o \
interface/vchiq_arm/vchiq_debugfs.o \
- interface/vchiq_arm/vchiq_connected.o \
ifdef CONFIG_VCHIQ_CDEV
vchiq-objs += interface/vchiq_arm/vchiq_dev.o
#include "vchiq_arm.h"
#include "vchiq_bus.h"
#include "vchiq_debugfs.h"
-#include "vchiq_connected.h"
#include "vchiq_pagelist.h"
#define DEVICE_NAME "vchiq"
return tmp == (addr & PAGE_MASK);
}
+/*
+ * This function is called by the vchiq stack once it has been connected to
+ * the videocore and clients can start to use the stack.
+ */
+static void vchiq_call_connected_callbacks(struct vchiq_drv_mgmt *drv_mgmt)
+{
+ int i;
+
+ if (mutex_lock_killable(&drv_mgmt->connected_mutex))
+ return;
+
+ for (i = 0; i < drv_mgmt->num_deferred_callbacks; i++)
+ drv_mgmt->deferred_callback[i]();
+
+ drv_mgmt->num_deferred_callbacks = 0;
+ drv_mgmt->connected = true;
+ mutex_unlock(&drv_mgmt->connected_mutex);
+}
+
+/*
+ * This function is used to defer initialization until the vchiq stack is
+ * initialized. If the stack is already initialized, then the callback will
+ * be made immediately, otherwise it will be deferred until
+ * vchiq_call_connected_callbacks is called.
+ */
+void vchiq_add_connected_callback(struct vchiq_device *device, void (*callback)(void))
+{
+ struct vchiq_drv_mgmt *drv_mgmt = device->drv_mgmt;
+
+ if (mutex_lock_killable(&drv_mgmt->connected_mutex))
+ return;
+
+ if (drv_mgmt->connected) {
+ /* We're already connected. Call the callback immediately. */
+ callback();
+ } else {
+ if (drv_mgmt->num_deferred_callbacks >= VCHIQ_DRV_MAX_CALLBACKS) {
+ dev_err(&device->dev,
+ "core: deferred callbacks(%d) exceeded the maximum limit(%d)\n",
+ drv_mgmt->num_deferred_callbacks, VCHIQ_DRV_MAX_CALLBACKS);
+ } else {
+ drv_mgmt->deferred_callback[drv_mgmt->num_deferred_callbacks] =
+ callback;
+ drv_mgmt->num_deferred_callbacks++;
+ }
+ }
+ mutex_unlock(&drv_mgmt->connected_mutex);
+}
+EXPORT_SYMBOL(vchiq_add_connected_callback);
+
/* There is a potential problem with partial cache lines (pages?)
* at the ends of the block when reading. If the CPU accessed anything in
* the same line (page?) then it may have pulled old data into the cache,
#define VCHIQ_DRV_MAX_CALLBACKS 10
struct rpi_firmware;
+struct vchiq_device;
enum USE_TYPE_E {
USE_TYPE_SERVICE,
extern void
vchiq_instance_set_trace(struct vchiq_instance *instance, int trace);
+extern void
+vchiq_add_connected_callback(struct vchiq_device *device,
+ void (*callback)(void));
+
#if IS_ENABLED(CONFIG_VCHIQ_CDEV)
extern void
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
-/* Copyright (c) 2010-2012 Broadcom. All rights reserved. */
-
-#include "vchiq_arm.h"
-#include "vchiq_connected.h"
-#include "vchiq_core.h"
-#include <linux/module.h>
-#include <linux/mutex.h>
-
-#define MAX_CALLBACKS 10
-
-/*
- * This function is used to defer initialization until the vchiq stack is
- * initialized. If the stack is already initialized, then the callback will
- * be made immediately, otherwise it will be deferred until
- * vchiq_call_connected_callbacks is called.
- */
-void vchiq_add_connected_callback(struct vchiq_device *device, void (*callback)(void))
-{
- struct vchiq_drv_mgmt *drv_mgmt = device->drv_mgmt;
-
- if (mutex_lock_killable(&drv_mgmt->connected_mutex))
- return;
-
- if (drv_mgmt->connected) {
- /* We're already connected. Call the callback immediately. */
- callback();
- } else {
- if (drv_mgmt->num_deferred_callbacks >= MAX_CALLBACKS) {
- dev_err(&device->dev,
- "core: There already %d callback registered - please increase MAX_CALLBACKS\n",
- drv_mgmt->num_deferred_callbacks);
- } else {
- drv_mgmt->deferred_callback[drv_mgmt->num_deferred_callbacks] =
- callback;
- drv_mgmt->num_deferred_callbacks++;
- }
- }
- mutex_unlock(&drv_mgmt->connected_mutex);
-}
-EXPORT_SYMBOL(vchiq_add_connected_callback);
-
-/*
- * This function is called by the vchiq stack once it has been connected to
- * the videocore and clients can start to use the stack.
- */
-void vchiq_call_connected_callbacks(struct vchiq_drv_mgmt *drv_mgmt)
-{
- int i;
-
- if (mutex_lock_killable(&drv_mgmt->connected_mutex))
- return;
-
- for (i = 0; i < drv_mgmt->num_deferred_callbacks; i++)
- drv_mgmt->deferred_callback[i]();
-
- drv_mgmt->num_deferred_callbacks = 0;
- drv_mgmt->connected = true;
- mutex_unlock(&drv_mgmt->connected_mutex);
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
-/* Copyright (c) 2010-2012 Broadcom. All rights reserved. */
-
-#include "vchiq_bus.h"
-
-#ifndef VCHIQ_CONNECTED_H
-#define VCHIQ_CONNECTED_H
-
-struct vchiq_drv_mgmt;
-
-void vchiq_add_connected_callback(struct vchiq_device *device, void (*callback)(void));
-void vchiq_call_connected_callbacks(struct vchiq_drv_mgmt *mgmt);
-
-#endif /* VCHIQ_CONNECTED_H */