ARM: dts: qcom: sdx55: List the property values vertically

To align with the rest of the devicetree files and the relative properties,
let's list the values of properties such as {reg/clock/interrupt}-names
vertically.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308082424.140224-9-manivannan.sadhasivam@linaro.org

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 9dabb94eafbcf7b927b432a62652c290485dc814..286fa92da42875ff594bdd6333dc56146bcf5e17 100644 (file)
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -393,7 +393,11 @@
                              <0x40001000 0x1000>,
                              <0x40200000 0x100000>,
                              <0x01c03000 0x3000>;
-                       reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+                       reg-names = "parf",
+                                   "dbi",
+                                   "elbi",
+                                   "atu",
+                                   "addr_space",
                                    "mmio";
 
                        qcom,perst-regs = <&tcsr 0xb258 0xb270>;
@@ -405,12 +409,18 @@
                                 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
                                 <&gcc GCC_PCIE_SLEEP_CLK>,
                                 <&gcc GCC_PCIE_0_CLKREF_CLK>;
-                       clock-names = "aux", "cfg", "bus_master", "bus_slave",
-                                     "slave_q2a", "sleep", "ref";
+                       clock-names = "aux",
+                                     "cfg",
+                                     "bus_master",
+                                     "bus_slave",
+                                     "slave_q2a",
+                                     "sleep",
+                                     "ref";
 
                        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-                       interrupt-names = "global", "doorbell";
+                       interrupt-names = "global",
+                                         "doorbell";
                        reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
                        wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
                        resets = <&gcc GCC_PCIE_BCR>;
@@ -434,7 +444,10 @@
                                 <&gcc GCC_PCIE_CFG_AHB_CLK>,
                                 <&gcc GCC_PCIE_0_CLKREF_CLK>,
                                 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
-                       clock-names = "aux", "cfg_ahb", "ref", "refgen";
+                       clock-names = "aux",
+                                     "cfg_ahb",
+                                     "ref",
+                                     "refgen";
 
                        resets = <&gcc GCC_PCIE_PHY_BCR>;
                        reset-names = "phy";