ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes

Add the missing required DT property `atmel,usart-mode` to the serial
nodes of Atmel/Microchip DT files.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-4-sergiu.moga@microchip.com

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 67bce8d609088e23ce60ca381cf5eda36e09315f..4ba52ba11dc62379457a9a0ff5cc22007ebe5772 100644 (file)
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -260,6 +260,7 @@
        uart1: serial@200 {
                compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                reg = <0x200 0x200>;
+               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
                dmas = <&dma0
                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |

diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index d1181ead18e5a86e0ada25d6ea287dffdca921f0..7a113325abb9ed958274e59a1abf477060a268eb 100644 (file)
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        #address-cells = <1>;
@@ -596,6 +597,7 @@
                        dbgu: serial@fffff200 {
                                compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
                                reg = <0xfffff200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_dbgu>;
@@ -607,6 +609,7 @@
                        usart0: serial@fffc0000 {
                                compatible = "atmel,at91rm9200-usart";
                                reg = <0xfffc0000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -620,6 +623,7 @@
                        usart1: serial@fffc4000 {
                                compatible = "atmel,at91rm9200-usart";
                                reg = <0xfffc4000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -633,6 +637,7 @@
                        usart2: serial@fffc8000 {
                                compatible = "atmel,at91rm9200-usart";
                                reg = <0xfffc8000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -646,6 +651,7 @@
                        usart3: serial@fffcc000 {
                                compatible = "atmel,at91rm9200-usart";
                                reg = <0xfffcc000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;

diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 9d9820db9482c59322c233a4f445784ba857aeab..789fe356dbf60365d427968f9f926bd308ce3170 100644 (file)
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        #address-cells = <1>;
@@ -532,6 +533,7 @@
                        dbgu: serial@fffff200 {
                                compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                                reg = <0xfffff200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_dbgu>;
@@ -543,6 +545,7 @@
                        usart0: serial@fffb0000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb0000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -556,6 +559,7 @@
                        usart1: serial@fffb4000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb4000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -569,6 +573,7 @@
                        usart2: serial@fffb8000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb8000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -582,6 +587,7 @@
                        usart3: serial@fffd0000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffd0000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -595,6 +601,7 @@
                        uart0: serial@fffd4000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffd4000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -608,6 +615,7 @@
                        uart1: serial@fffd8000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffd8000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;

diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 259aca5653051f8db6d7c4b302b595b512bfd7bb..ee0bd1aceb3f0cc16d12a926fc3d5a8d7f9b862b 100644 (file)
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        #address-cells = <1>;
@@ -179,6 +180,7 @@
                        usart0: serial@fffb0000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb0000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -192,6 +194,7 @@
                        usart1: serial@fffb4000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb4000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -205,6 +208,7 @@
                        usart2: serial@fffb8000{
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb8000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -301,6 +305,7 @@
                        dbgu: serial@fffff200 {
                                compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                                reg = <0xfffff200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_dbgu>;

diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index c080df8c2312b9a74dd7d97df958b4e7ebd49584..3ce9ea9873129a0698811a2ab930c0a34a3ac048 100644 (file)
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        #address-cells = <1>;
@@ -540,6 +541,7 @@
                        dbgu: serial@ffffee00 {
                                compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                                reg = <0xffffee00 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_dbgu>;
@@ -551,6 +553,7 @@
                        usart0: serial@fff8c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfff8c000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -564,6 +567,7 @@
                        usart1: serial@fff90000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfff90000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -577,6 +581,7 @@
                        usart2: serial@fff94000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfff94000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 09794561c7ceb2dd6edd5f364c98eb56ff4aa78d..95f5d76234dbbdd6e92a8dae4cd95d1880799683 100644 (file)
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        #address-cells = <1>;
@@ -675,6 +676,7 @@
 
                        dbgu: serial@ffffee00 {
                                compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                reg = <0xffffee00 0x200>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
@@ -687,6 +689,7 @@
                        usart0: serial@fff8c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfff8c000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -700,6 +703,7 @@
                        usart1: serial@fff90000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfff90000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -713,6 +717,7 @@
                        usart2: serial@fff94000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfff94000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -726,6 +731,7 @@
                        usart3: serial@fff98000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfff98000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;

diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 556f35ce49e34a4c7952a09e96d3a08909bf2145..83114d26f10d027179ac91d65bbc2290fb1d62fa 100644 (file)
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        #address-cells = <1>;
@@ -593,6 +594,7 @@
                        dbgu: serial@fffff200 {
                                compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                                reg = <0xfffff200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_dbgu>;
@@ -618,6 +620,7 @@
                        usart0: serial@f801c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf801c000 0x4000>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart0>;
@@ -629,6 +632,7 @@
                        usart1: serial@f8020000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8020000 0x4000>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart1>;
@@ -640,6 +644,7 @@
                        usart2: serial@f8024000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8024000 0x4000>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart2>;
@@ -651,6 +656,7 @@
                        usart3: serial@f8028000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8028000 0x4000>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart3>;

diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 12c634811820120f27f0f948de36afdfee972b9c..364a2ff0a763d9105da86fabede181ec5078459d 100644 (file)
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        #address-cells = <1>;
@@ -175,6 +176,7 @@
                        usart0: serial@fffb0000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb0000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -188,6 +190,7 @@
                        usart1: serial@fffb4000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb4000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -201,6 +204,7 @@
                        usart2: serial@fffb8000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb8000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -214,6 +218,7 @@
                        usart3: serial@fffbc000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffbc000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -322,6 +327,7 @@
                        dbgu: serial@fffff200 {
                                compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                                reg = <0xfffff200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_dbgu>;

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index ea3b11336c794f10703cfd15080555245a7a761f..0c26c925761b27822142388eb06d979a14ec9da4 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        #address-cells = <1>;
@@ -674,6 +675,7 @@
                        dbgu: serial@fffff200 {
                                compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                                reg = <0xfffff200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_dbgu>;
@@ -688,6 +690,7 @@
                        usart0: serial@f801c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf801c000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart0>;
@@ -702,6 +705,7 @@
                        usart1: serial@f8020000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8020000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart1>;
@@ -716,6 +720,7 @@
                        usart2: serial@f8024000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8024000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart2>;
@@ -775,6 +780,7 @@
                        uart0: serial@f8040000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8040000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_uart0>;
@@ -786,6 +792,7 @@
                        uart1: serial@f8044000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8044000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_uart1>;

diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 098d3fef5c371dcf6fb204e3f98c1e646d62675c..a47c765e1b20a825177c613d4b93a6392c393a75 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        aliases {
@@ -44,6 +45,7 @@
                        usart3: serial@f8028000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8028000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart3>;

diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index d3f60f6a456d6d578b188c2a966eeda38d7d98dd..8f5477e307dd49e444d66289663f03048b59b5e2 100644 (file)
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 
 / {
@@ -583,6 +584,7 @@
                        dbgu: serial@fffff200 {
                                compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                                reg = <0xfffff200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
                                dmas = <&dma0
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 2c50a021aa76831f7870fef5612906398d3bfb71..14c35c12a115fe8900d0b6248b0053ef11ffa219 100644 (file)
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 
 / {
@@ -441,6 +442,7 @@
                        uart0: serial@f801c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf801c000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
                                dmas = <&dma0
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -457,6 +459,7 @@
                        uart1: serial@f8020000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8020000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
                                dmas = <&dma0
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -473,6 +476,7 @@
                        uart2: serial@f8024000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8024000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
                                dmas = <&dma0
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -530,6 +534,7 @@
                                uart5: serial@200 {
                                        compatible = "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
+                                       atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
                                        clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
                                        clock-names = "usart";
@@ -600,6 +605,7 @@
                                uart6: serial@200 {
                                        compatible = "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
+                                       atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                        interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
                                        clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
                                        clock-names = "usart";
@@ -769,6 +775,7 @@
                        uart3: serial@fc008000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfc008000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
                                dmas = <&dma1
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -785,6 +792,7 @@
                        uart4: serial@fc00c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfc00c000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                dmas = <&dma0
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
                                         AT91_XDMAC_DT_PERID(43))>,
@@ -810,6 +818,7 @@
                                uart7: serial@200 {
                                        compatible = "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
+                                       atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                        interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
                                        clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
                                        clock-names = "usart";
@@ -880,6 +889,7 @@
                                uart8: serial@200 {
                                        compatible = "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
+                                       atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                        interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
                                        clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
                                        clock-names = "usart";
@@ -951,6 +961,7 @@
                                uart9: serial@200 {
                                        compatible = "atmel,at91sam9260-usart";
                                        reg = <0x200 0x200>;
+                                       atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                        interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
                                        clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
                                        clock-names = "usart";

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 2d0935ad2225d6c3500e9c7034982150f2ff1071..bde8e92d60bb10973b8c53e689e9e9bcea8975cc 100644 (file)
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        #address-cells = <1>;
@@ -194,6 +195,7 @@
                        usart0: serial@f001c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf001c000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
                                       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -208,6 +210,7 @@
                        usart1: serial@f0020000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf0020000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
                                       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -222,6 +225,7 @@
                        uart0: serial@f0024000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf0024000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_uart0>;
@@ -356,6 +360,7 @@
                        usart2: serial@f8020000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8020000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
                                       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -370,6 +375,7 @@
                        usart3: serial@f8024000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8024000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
                                       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -464,6 +470,7 @@
                        dbgu: serial@ffffee00 {
                                compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                                reg = <0xffffee00 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
                                dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
                                       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;

diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index a3eaba995cf449244162eb52fe5bf121d324b1e2..44d1173f2ffb7c121acb85e20cc7a5102c9aa26d 100644 (file)
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        aliases {
@@ -39,6 +40,7 @@
                        uart0: serial@f0024000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf0024000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_uart0>;
@@ -50,6 +52,7 @@
                        uart1: serial@f8028000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8028000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_uart1>;

diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 1e5c01898ccff3d5eb6e54a173de7c19be56c3cc..af62157ae214f30b2bde3d88280109926e9c813f 100644 (file)
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -278,6 +279,7 @@
                        uart0: serial@f8004000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8004000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma0
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -437,6 +439,7 @@
                        usart0: serial@f802c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf802c000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma0
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -455,6 +458,7 @@
                        usart1: serial@f8030000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8030000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma0
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -490,6 +494,7 @@
                        uart1: serial@fc004000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfc004000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma0
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -508,6 +513,7 @@
                        usart2: serial@fc008000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfc008000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma1
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -526,6 +532,7 @@
                        usart3: serial@fc00c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfc00c000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma1
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -544,6 +551,7 @@
                        usart4: serial@fc010000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfc010000 0x100>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
                                dmas = <&dma1
                                        (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -770,6 +778,7 @@
                        dbgu: serial@fc069000 {
                                compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                                reg = <0xfc069000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_dbgu>;

diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index 249f9c640b6c4807fddb367d30878c783dc5d2a2..7bd8ae8e8d3808809aa610509dda721c4820e1b0 100644 (file)
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        model = "Microchip SAMA7G5 family SoC";
@@ -603,6 +604,7 @@
                        uart0: serial@200 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0x200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
                                clock-names = "usart";
@@ -651,6 +653,7 @@
                        uart3: serial@200 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0x200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
                                clock-names = "usart";
@@ -694,6 +697,7 @@
                        uart4: serial@200 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0x200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
                                clock-names = "usart";
@@ -719,6 +723,7 @@
                        uart7: serial@200 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0x200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
                                clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
                                clock-names = "usart";