arm64: dts: renesas: hihope-common: Move du clk properties out of common dtsi

RZ/G2N board is pin compatible with RZ/G2M board. However on the SoC
side RZ/G2N uses DU3 where as RZ/G2M uses DU2 for the DPAD. In order to
reuse the common dtsi for both the boards, it is required to move du clock
properties from common dtsi to board specific dts.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1570029619-43238-2-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 69585d6e365386519dd66c55f33e6c1b12b9425d..2c942a7eaeeba2933a33a749a043f5fb79071cef 100644 (file)
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -142,14 +142,6 @@
 };
 
 &du {
-       clocks = <&cpg CPG_MOD 724>,
-                <&cpg CPG_MOD 723>,
-                <&cpg CPG_MOD 722>,
-                <&versaclock5 1>,
-                <&x302_clk>,
-                <&versaclock5 2>;
-       clock-names = "du.0", "du.1", "du.2",
-                     "dclkin.0", "dclkin.1", "dclkin.2";
        status = "okay";
 };
 

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
index 93ca973c856cc25d41c1623063c332c1621a46f5..96f2fb080a1a20c39b67fcbe359d593972fae59a 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
@@ -24,3 +24,14 @@
                reg = <0x6 0x00000000 0x0 0x80000000>;
        };
 };
+
+&du {
+       clocks = <&cpg CPG_MOD 724>,
+                <&cpg CPG_MOD 723>,
+                <&cpg CPG_MOD 722>,
+                <&versaclock5 1>,
+                <&x302_clk>,
+                <&versaclock5 2>;
+       clock-names = "du.0", "du.1", "du.2",
+                     "dclkin.0", "dclkin.1", "dclkin.2";
+};