pinctrl: sunxi: Add I/O bias setting for H6 R-PIO

H6 requires I/O bias configuration on both of its PIO devices.
Previously it was only done for the main PIO.

The setting for Port L is at bit 0, so the bank calculation needs to
account for the pin base. Otherwise the wrong bit is used.

Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-3-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
index 487a76c45f7e8977b88a127e16e814c67eeec8ad..3aba0aec3d7823ac2bc6f9655b709163fc848eee 100644 (file)
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
@@ -106,6 +106,7 @@ static const struct sunxi_pinctrl_desc sun50i_h6_r_pinctrl_data = {
        .npins = ARRAY_SIZE(sun50i_h6_r_pins),
        .pin_base = PL_BASE,
        .irq_banks = 2,
+       .io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL,
 };
 
 static int sun50i_h6_r_pinctrl_probe(struct platform_device *pdev)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index d9327d7d56eea8f4844980118448f6f8cd1b6593..3c5e71359ca8d4360a528e9240da7302cf59e70d 100644 (file)
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -622,7 +622,7 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
                                         unsigned pin,
                                         struct regulator *supply)
 {
-       unsigned short bank = pin / PINS_PER_BANK;
+       unsigned short bank;
        unsigned long flags;
        u32 val, reg;
        int uV;
@@ -638,6 +638,9 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
        if (uV == 0)
                return 0;
 
+       pin -= pctl->desc->pin_base;
+       bank = pin / PINS_PER_BANK;
+
        switch (pctl->desc->io_bias_cfg_variant) {
        case BIAS_VOLTAGE_GRP_CONFIG:
                /*
@@ -655,8 +658,6 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
                else
                        val = 0xD; /* 3.3V */
 
-               pin -= pctl->desc->pin_base;
-
                reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
                reg &= ~IO_BIAS_MASK;
                writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));