drm/i915/dp: Register definition for DP compliance register

DP_COMP_CTL and DP_COMP_PAT register used to program DP
compliance pattern.

v1: Initial patch.
v2: used pipe instead of port in macro definition. [Manasi]
v3: used trans_offset for offset calculation. [Manasi]
v4: Used MMIO_PIPE for evenly spaced register offset instead
MMIO_PIPE2. [Ville]

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324051111.29398-1-animesh.manna@intel.com

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 59e64acc2c5680afd514b860a258c321728ea2d9..490e9f4a287a45798951b892448b5a308b798400 100644 (file)
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9794,6 +9794,24 @@ enum skl_power_gate {
 #define  DDI_BUF_BALANCE_LEG_ENABLE    (1 << 31)
 #define DDI_BUF_TRANS_HI(port, i)      _MMIO(_PORT(port, _DDI_BUF_TRANS_A, _DDI_BUF_TRANS_B) + (i) * 8 + 4)
 
+/* DDI DP Compliance Control */
+#define _DDI_DP_COMP_CTL_A                     0x605F0
+#define _DDI_DP_COMP_CTL_B                     0x615F0
+#define DDI_DP_COMP_CTL(pipe)                  _MMIO_PIPE(pipe, _DDI_DP_COMP_CTL_A, _DDI_DP_COMP_CTL_B)
+#define   DDI_DP_COMP_CTL_ENABLE               (1 << 31)
+#define   DDI_DP_COMP_CTL_D10_2                        (0 << 28)
+#define   DDI_DP_COMP_CTL_SCRAMBLED_0          (1 << 28)
+#define   DDI_DP_COMP_CTL_PRBS7                        (2 << 28)
+#define   DDI_DP_COMP_CTL_CUSTOM80             (3 << 28)
+#define   DDI_DP_COMP_CTL_HBR2                 (4 << 28)
+#define   DDI_DP_COMP_CTL_SCRAMBLED_1          (5 << 28)
+#define   DDI_DP_COMP_CTL_HBR2_RESET           (0xFC << 0)
+
+/* DDI DP Compliance Pattern */
+#define _DDI_DP_COMP_PAT_A                     0x605F4
+#define _DDI_DP_COMP_PAT_B                     0x615F4
+#define DDI_DP_COMP_PAT(pipe, i)               _MMIO(_PIPE(pipe, _DDI_DP_COMP_PAT_A, _DDI_DP_COMP_PAT_B) + (i) * 4)
+
 /* Sideband Interface (SBI) is programmed indirectly, via
  * SBI_ADDR, which contains the register offset; and SBI_DATA,
  * which contains the payload */