ARM: dts: imx6q-h100: Remove unneeded unit address

Remove the unneeded unit address for the port nodes in order to fix
the following build warnings with W=1:

arch/arm/boot/dts/imx6q-h100.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/i2c@21a0000/tc358743@f/port@0 has a unit name, but no reg property
arch/arm/boot/dts/imx6q-h100.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@0 has a unit name, but no reg property

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
index 743c11f1ad4eab86846e69b73f16e4caeac7b425..cc1ce46b9f640d6859cfae74ac1c6600461ac6cb 100644 (file)
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -205,7 +205,7 @@
                reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
                /* IRQ has a wrong pull resistor which renders it useless  */
 
-               port@0 {
+               port {
                        tc358743_out: endpoint {
                                remote-endpoint = <&mipi_csi2_in>;
                                data-lanes = <1 2 3 4>;
@@ -348,7 +348,7 @@
 &mipi_csi {
        status = "okay";
 
-       port@0 {
+       port {
                mipi_csi2_in: endpoint {
                        remote-endpoint = <&tc358743_out>;
                        data-lanes = <1 2 3 4>;