arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios

The recommended name for enable GPIOs property in regulator-gpio is
enable-gpios.  This is also required by bindings:

  rk3399-gru-bob.dtb: ppvar-sd-card-io: Unevaluated properties are not allowed ('enable-gpio' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230725142616.157405-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 23bfba86daabed74cb3af74b762196bf0161d15b..c9bf1d5c3a426418f97e34c0043c8013de690e0f 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -250,7 +250,7 @@
                pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
 
                enable-active-high;
-               enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+               enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
                gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
                states = <1800000 0x1>,
                         <3000000 0x0>;