arm64: dts: qcom: msm8916: remove unit name for thermal trip points

The thermal trip points have unit name but no reg property, so we can
remove them. It also fixes the following warnings from 'make dtbs_check'
after adding the thermal yaml bindings.

arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/2d3d045c18a2fb85b28cf304aa11ae6e6538d75e.1585562459.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 0eba168f0a5cca1d1dbfca42a6d5e41bf6a7fead..569639fe8081f4c14565c0ff62dcaf2abbab10ff 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -264,7 +264,7 @@
                        thermal-sensors = <&tsens 4>;
 
                        trips {
-                               cpu2_3_alert0: trip-point@0 {
+                               cpu2_3_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -294,7 +294,7 @@
                        thermal-sensors = <&tsens 2>;
 
                        trips {
-                               gpu_alert0: trip-point@0 {
+                               gpu_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -314,7 +314,7 @@
                        thermal-sensors = <&tsens 1>;
 
                        trips {
-                               cam_alert0: trip-point@0 {
+                               cam_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -329,7 +329,7 @@
                        thermal-sensors = <&tsens 0>;
 
                        trips {
-                               modem_alert0: trip-point@0 {
+                               modem_alert0: trip-point0 {
                                        temperature = <85000>;
                                        hysteresis = <2000>;
                                        type = "hot";