dt-bindings: thermal: convert st,stih407-thermal to DT schema

'st,passive_colling_temp' does not appear in the device-tree, 'reg' and
'#thermal-sensor-cells' are also missing in the device description.

Convert st,stih407-thermal binding to DT schema format in order to clean
unused 'st,passive_cooling_temp' and add missing properties.

Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240320-thermal-v3-1-700296694c4a@gmail.com

diff --git a/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml
new file mode 100644 (file)
index 0000000..9f6fc5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/st,stih407-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi digital thermal sensor (DTS)
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+  - Lee Jones <lee@kernel.org>
+
+allOf:
+  - $ref: thermal-sensor.yaml
+
+properties:
+  compatible:
+    const: st,stih407-thermal
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: thermal
+
+  interrupts:
+    description:
+      For thermal sensors for which no interrupt has been defined, a polling
+      delay of 1000ms will be used to read the temperature from device.
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    temperature-sensor@91a0000 {
+        compatible = "st,stih407-thermal";
+        reg = <0x91a0000 0x28>;
+        clock-names = "thermal";
+        clocks = <&CLK_SYSIN>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+        #thermal-sensor-cells = <0>;
+    };
+...

diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt
deleted file mode 100644 (file)
index a2f9391..0000000
--- a/Documentation/devicetree/bindings/thermal/st-thermal.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
-
-Required parameters:
--------------------
-
-compatible :   Should be "st,stih407-thermal"
-
-clock-names :  Should be "thermal".
-                 See: Documentation/devicetree/bindings/resource-names.txt
-clocks :       Phandle of the clock used by the thermal sensor.
-                 See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional parameters:
--------------------
-
-reg :          For non-sysconf based sensors, this should be the physical base
-               address and length of the sensor's registers.
-interrupts :   Standard way to define interrupt number.
-                 NB: For thermal sensor's for which no interrupt has been
-                 defined, a polling delay of 1000ms will be used to read the
-                 temperature from device.
-
-Example:
-
-       temp0@91a0000 {
-               compatible = "st,stih407-thermal";
-               reg = <0x91a0000 0x28>;
-               clock-names = "thermal";
-               clocks = <&CLK_SYSIN>;
-               interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
-               st,passive_cooling_temp = <110>;
-       };