spi: s3c64xx: support loopback mode

Modern exynos SoCs can support self loopback mode via setting BIT(3) of
MODE_CFG register. Previous SoCs don't have the bit so we need to add
has_loopback field in the s3c64xx_spi_port_config. Exynos Auto v9 SoC
has the bit and it will define the field to "true".
When it is set, SPI_LOOP mode will be marked.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220629102304.65712-2-chanho61.park@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 302c1d4a28b1ecdc3f1ff8d01ad045deed6498a6..0c917cf891ca9d455c88c8b97e8b3c265bbc9de1 100644 (file)
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -59,6 +59,7 @@
 #define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD      (1<<17)
 #define S3C64XX_SPI_MODE_BUS_TSZ_WORD          (2<<17)
 #define S3C64XX_SPI_MODE_BUS_TSZ_MASK          (3<<17)
+#define S3C64XX_SPI_MODE_SELF_LOOPBACK         (1<<3)
 #define S3C64XX_SPI_MODE_RXDMA_ON              (1<<2)
 #define S3C64XX_SPI_MODE_TXDMA_ON              (1<<1)
 #define S3C64XX_SPI_MODE_4BURST                        (1<<0)
@@ -135,6 +136,7 @@ struct s3c64xx_spi_dma_data {
  * @clk_from_cmu: True, if the controller does not include a clock mux and
  *     prescaler unit.
  * @clk_ioclk: True if clock is present on this device
+ * @has_loopback: True if loopback mode can be supported
  *
  * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but
  * differ in some aspects such as the size of the fifo and spi bus clock
@@ -149,6 +151,7 @@ struct s3c64xx_spi_port_config {
        bool    high_speed;
        bool    clk_from_cmu;
        bool    clk_ioclk;
+       bool    has_loopback;
 };
 
 /**
@@ -659,6 +662,9 @@ static int s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
                break;
        }
 
+       if ((sdd->cur_mode & SPI_LOOP) && sdd->port_conf->has_loopback)
+               val |= S3C64XX_SPI_MODE_SELF_LOOPBACK;
+
        writel(val, regs + S3C64XX_SPI_MODE_CFG);
 
        if (sdd->port_conf->clk_from_cmu) {
@@ -1148,6 +1154,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
                                        SPI_BPW_MASK(8);
        /* the spi->mode bits understood by this driver: */
        master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+       if (sdd->port_conf->has_loopback)
+               master->mode_bits |= SPI_LOOP;
        master->auto_runtime_pm = true;
        if (!is_polling(sdd))
                master->can_dma = s3c64xx_spi_can_dma;