From: Michal Vokáč <michal.vokac@ysoft.com>
Date: Wed, 14 Feb 2024 09:03:27 +0000 (+0100)
Subject: ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=023bd910d3ab735459f84b22bb99fb9e00bd9d76;p=linux.git

ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address

This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.

Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index 3be38a3c4bb11..d2b3e09eb7df8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -127,7 +127,7 @@
 
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {