From: Jonathan Bakker <xc-racer2@live.ca>
Date: Fri, 1 May 2020 23:50:13 +0000 (-0700)
Subject: ARM: dts: s5pv210: Disable pull for vibrator enable GPIO on Aries boards
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=04568cb58a431e51efccd98853ba3a31f758b77f;p=linux.git

ARM: dts: s5pv210: Disable pull for vibrator enable GPIO on Aries boards

The enable GPIO for the fixed vibrator regulator shouldn't be
pulled in one direction or the other.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---

diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 0fa3de3c985dc..945259aa5d55a 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -52,6 +52,9 @@
 		regulator-name = "vibrator-en";
 		enable-active-high;
 		gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctr-0 = <&vibrator_ena>;
 	};
 
 	touchkey_vdd: regulator-fixed-1 {
@@ -656,6 +659,12 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
+	vibrator_ena: vibrator-ena {
+		samsung,pins = "gpj1-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	touchkey_i2c_pins: touchkey-i2c-pins {
 		samsung,pins = "gpj3-0", "gpj3-1";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;