From: Andy Shevchenko Date: Tue, 2 Apr 2024 19:50:31 +0000 (+0300) Subject: serial: max3100: Make struct plat_max3100 local X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=0487724912abc14eb0e95c352a29e6691a733631;p=linux.git serial: max3100: Make struct plat_max3100 local There is no user of the struct plat_max3100 outside the driver. Inline its contents into the driver. While at it, drop outdated example in the comment. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240402195306.269276-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 8c6eaf908bce9..0e30201e9689f 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * * Copyright (C) 2008 Christian Pellegrin * * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have @@ -8,24 +7,6 @@ * writing conf clears FIFO buffer and we cannot have this interrupt * always asking us for attention. * - * Example platform data: - - static struct plat_max3100 max3100_plat_data = { - .loopback = 0, - .crystal = 0, - .poll_time = 100, - }; - - static struct spi_board_info spi_board_info[] = { - { - .modalias = "max3100", - .platform_data = &max3100_plat_data, - .irq = IRQ_EINT12, - .max_speed_hz = 5*1000*1000, - .chip_select = 0, - }, - }; - * The initial minor number is 209 in the low-density serial port: * mknod /dev/ttyMAX0 c 204 209 */ @@ -49,7 +30,24 @@ #include -#include +/** + * struct plat_max3100 - MAX3100 SPI UART platform data + * @loopback: force MAX3100 in loopback + * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432 + * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook + * called on suspend and resume to activate it. + * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw + * flow ctrl is possible but you have less CPU usage) + * + * You should use this structure in your machine description to specify + * how the MAX3100 is connected. + */ +struct plat_max3100 { + int loopback; + int crystal; + void (*max3100_hw_suspend) (int suspend); + int poll_time; +}; #define MAX3100_C (1<<14) #define MAX3100_D (0<<14) diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h deleted file mode 100644 index befd55c08a7c6..0000000000000 --- a/include/linux/serial_max3100.h +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * - * Copyright (C) 2007 Christian Pellegrin - */ - - -#ifndef _LINUX_SERIAL_MAX3100_H -#define _LINUX_SERIAL_MAX3100_H 1 - - -/** - * struct plat_max3100 - MAX3100 SPI UART platform data - * @loopback: force MAX3100 in loopback - * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432 - * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook - * called on suspend and resume to activate it. - * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw - * flow ctrl is possible but you have less CPU usage) - * - * You should use this structure in your machine description to specify - * how the MAX3100 is connected. Example: - * - * static struct plat_max3100 max3100_plat_data = { - * .loopback = 0, - * .crystal = 0, - * .poll_time = 100, - * }; - * - * static struct spi_board_info spi_board_info[] = { - * { - * .modalias = "max3100", - * .platform_data = &max3100_plat_data, - * .irq = IRQ_EINT12, - * .max_speed_hz = 5*1000*1000, - * .chip_select = 0, - * }, - * }; - * - **/ -struct plat_max3100 { - int loopback; - int crystal; - void (*max3100_hw_suspend) (int suspend); - int poll_time; -}; - -#endif