From: Chen-Yu Tsai Date: Mon, 24 Apr 2023 10:04:09 +0000 (+0800) Subject: arm64: dts: mediatek: mt8192-asurada-hayato: Enable Bluetooth X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=04c3140312693a939ae55c8e368b79a0b8475c82;p=linux.git arm64: dts: mediatek: mt8192-asurada-hayato: Enable Bluetooth Hayato's Realtek WiFi/BT module has it's Bluetooth function wired to UART1. Add and enable the relevant device nodes for it. Signed-off-by: Chen-Yu Tsai Reviewed-by: NĂ­colas F. R. A. Prado Link: https://lore.kernel.org/r/20230424100409.2992418-1-wenst@chromium.org Signed-off-by: Matthias Brugger --- diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts index 43a823990a927..6e23428a3ed23 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts @@ -40,9 +40,90 @@ >; }; +&pio { + bt_pins: bt-pins { + pins-bt-kill { + pinmux = ; + output-low; + }; + + pins-bt-wake { + pinmux = ; + bias-pull-up; + }; + + pins-ap-wake-bt { + pinmux = ; + output-low; + }; + }; + + uart1_pins: uart1-pins { + pins-rx { + pinmux = ; + input-enable; + bias-pull-up; + }; + + pins-tx { + pinmux = ; + }; + + pins-cts { + pinmux = ; + input-enable; + }; + + pins-rts { + pinmux = ; + }; + }; + + uart1_pins_sleep: uart1-sleep-pins { + pins-rx { + pinmux = ; + input-enable; + bias-pull-up; + }; + + pins-tx { + pinmux = ; + }; + + pins-cts { + pinmux = ; + input-enable; + }; + + pins-rts { + pinmux = ; + }; + }; +}; + &touchscreen { compatible = "hid-over-i2c"; post-power-on-delay-ms = <10>; hid-descr-addr = <0x0001>; vdd-supply = <&pp3300_u>; }; + +&uart1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_pins>; + pinctrl-1 = <&uart1_pins_sleep>; + /delete-property/ interrupts; + interrupts-extended = <&gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>, + <&pio 94 IRQ_TYPE_EDGE_FALLING>; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + + enable-gpios = <&pio 144 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&pio 168 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&pio 22 GPIO_ACTIVE_LOW>; + }; +};