From: Tony Lindgren <tony@atomide.com>
Date: Wed, 10 Mar 2021 12:03:45 +0000 (+0200)
Subject: ARM: dts: Properly configure dra7 edma sysconfig registers
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=075249bc554614199f893061082741c1b2ceac29;p=linux.git

ARM: dts: Properly configure dra7 edma sysconfig registers

Looks like the TRM is not listing the sysconfig for edma, let's add it
based on am437x TRM edma registers as listed in sections "Table 10-26.
EDMA3CC Registers" and "Table 10-99. EDMA3TC Registers".

Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index f7e40227d7de4..4906e2f474863 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -369,8 +369,15 @@
 
 		target-module@43300000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43300000 0x4>;
-			reg-names = "rev";
+			reg = <0x43300000 0x4>,
+			      <0x43300010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -402,8 +409,15 @@
 
 		target-module@43400000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43400000 0x4>;
-			reg-names = "rev";
+			reg = <0x43400000 0x4>,
+			      <0x43400010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -420,8 +434,15 @@
 
 		target-module@43500000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43500000 0x4>;
-			reg-names = "rev";
+			reg = <0x43500000 0x4>,
+			      <0x43500010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;