From: Wolfram Sang <wsa@the-dreams.de>
Date: Thu, 21 Mar 2019 23:04:23 +0000 (+0100)
Subject: i2c: wmt: make bindings file name match the driver
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=080a910414659dfd18ffaf60a1e95b96c3f50eab;p=linux.git

i2c: wmt: make bindings file name match the driver

If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---

diff --git a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt b/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt
deleted file mode 100644
index 94a425eaa6c78..0000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Wondermedia I2C Controller
-
-Required properties :
-
- - compatible : should be "wm,wm8505-i2c"
- - reg : Offset and length of the register set for the device
- - interrupts : <IRQ> where IRQ is the interrupt number
- - clocks : phandle to the I2C clock source
-
-Optional properties :
-
- - clock-frequency : desired I2C bus clock frequency in Hz.
-	Valid values are 100000 and 400000.
-	Default to 100000 if not specified, or invalid value.
-
-Example :
-
-	i2c_0: i2c@d8280000 {
-		compatible = "wm,wm8505-i2c";
-		reg = <0xd8280000 0x1000>;
-		interrupts = <19>;
-		clocks = <&clki2c0>;
-		clock-frequency = <400000>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-wmt.txt b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
new file mode 100644
index 0000000000000..94a425eaa6c78
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
@@ -0,0 +1,24 @@
+* Wondermedia I2C Controller
+
+Required properties :
+
+ - compatible : should be "wm,wm8505-i2c"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number
+ - clocks : phandle to the I2C clock source
+
+Optional properties :
+
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+	Valid values are 100000 and 400000.
+	Default to 100000 if not specified, or invalid value.
+
+Example :
+
+	i2c_0: i2c@d8280000 {
+		compatible = "wm,wm8505-i2c";
+		reg = <0xd8280000 0x1000>;
+		interrupts = <19>;
+		clocks = <&clki2c0>;
+		clock-frequency = <400000>;
+	};