From: Manu Gautam Date: Wed, 2 May 2018 21:06:08 +0000 (+0530) Subject: clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=096abdc296f1a4b36c4429934f8c218e0baca815;p=linux.git clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk The USB and PCIE pipe clocks are sourced from external clocks inside the QMP USB/PCIE PHYs. Enabling or disabling of PIPE RCG clocks is dependent on PHY initialization sequence hence update halt_check to BRANCH_HALT_SKIP for these clocks so that clock status bit is not polled when enabling or disabling the clocks. It allows to simplify PHY client driver code which is both user and source of the pipe_clk and avoid error logging related status check on clk_disable/enable. Signed-off-by: Manu Gautam Reviewed-by: Douglas Anderson Signed-off-by: Stephen Boyd --- diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c index 5d74512092069..8ff24b228f9b4 100644 --- a/drivers/clk/qcom/gcc-msm8996.c +++ b/drivers/clk/qcom/gcc-msm8996.c @@ -1418,6 +1418,7 @@ static struct clk_branch gcc_usb3_phy_aux_clk = { static struct clk_branch gcc_usb3_phy_pipe_clk = { .halt_reg = 0x50004, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x50004, .enable_mask = BIT(0), @@ -2472,6 +2473,7 @@ static struct clk_branch gcc_pcie_0_aux_clk = { static struct clk_branch gcc_pcie_0_pipe_clk = { .halt_reg = 0x6b018, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x6b018, .enable_mask = BIT(0), @@ -2547,6 +2549,7 @@ static struct clk_branch gcc_pcie_1_aux_clk = { static struct clk_branch gcc_pcie_1_pipe_clk = { .halt_reg = 0x6d018, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x6d018, .enable_mask = BIT(0), @@ -2622,6 +2625,7 @@ static struct clk_branch gcc_pcie_2_aux_clk = { static struct clk_branch gcc_pcie_2_pipe_clk = { .halt_reg = 0x6e018, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x6e018, .enable_mask = BIT(0),