From: Soeren Moch Date: Thu, 3 Oct 2019 21:50:34 +0000 (+0200) Subject: arm64: dts: rockchip: fix RockPro64 vdd-log regulator settings X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=0990c5e7573098117c69651821647c228483e31b;p=linux.git arm64: dts: rockchip: fix RockPro64 vdd-log regulator settings The RockPro64 schematic [1] page 18 states a min voltage of 0.8V and a max voltage of 1.4V for the VDD_LOG pwm regulator. However, there is an additional note that the pwm parameter needs to be modified. From the schematics a voltage range of 0.8V to 1.7V can be calculated. Additional voltage measurements on the board show that this fix indeed leads to the correct voltage, while without this fix the voltage was set too high. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Signed-off-by: Soeren Moch Link: https://lore.kernel.org/r/20191003215036.15023-1-smoch@web.de Signed-off-by: Heiko Stuebner --- diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index c27d8a6ae1c59..98a5f323bc1d3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -173,7 +173,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; + regulator-max-microvolt = <1700000>; vin-supply = <&vcc5v0_sys>; }; };