From: Alexey Minnekhanov Date: Wed, 19 Jul 2023 09:34:58 +0000 (+0300) Subject: arm64: dts: qcom: sdm630: Add support for modem remoteproc X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=09f1642eca6eb6d25a630214098350dc02917954;p=linux.git arm64: dts: qcom: sdm630: Add support for modem remoteproc Modem subsystem in SDM630/660 is similar to MSM8998 and device tree node for it is based on the one from msm8998.dtsi. Signed-off-by: Alexey Minnekhanov Link: https://lore.kernel.org/r/20230719093458.2668842-1-alexeymin@postmarketos.org Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index ec6003212c4d5..d8af72f3682e6 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1028,6 +1028,65 @@ }; }; + remoteproc_mss: remoteproc@4080000 { + compatible = "qcom,sdm660-mss-pil"; + reg = <0x04080000 0x100>, <0x04180000 0x40>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GPLL0_OUT_MSSCC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "bus", + "mem", + "gpll0_mss", + "snoc_axi", + "mnoc_axi", + "qdss", + "xo"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + + power-domains = <&rpmpd SDM660_VDDCX>, + <&rpmpd SDM660_VDDMX>; + power-domain-names = "cx", "mx"; + + memory-region = <&mba_region>, <&mpss_region>; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 15>; + }; + }; + adreno_gpu: gpu@5000000 { compatible = "qcom,adreno-508.0", "qcom,adreno";