From: David S. Miller Date: Fri, 28 Aug 2020 13:48:44 +0000 (-0700) Subject: Merge branch 'Add-phylib-support-to-smsc95xx' X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=0baf01942d3dc52ea7f52c34cb88c6be39de6129;p=linux.git Merge branch 'Add-phylib-support-to-smsc95xx' Andre Edich says: ==================== Add phylib support to smsc95xx To allow to probe external PHY drivers, this patch series adds use of phylib to the smsc95xx driver. Changes in v5: - Removed all phy_read calls from the smsc95xx driver. Changes in v4: - Removed useless inline type qualifier. Changes in v3: - Moved all MDI-X functionality to the corresponding phy driver; - Removed field internal_phy from a struct smsc95xx_priv; - Initialized field is_internal of a struct phy_device; - Kconfig: Added selection of PHYLIB and SMSC_PHY for USB_NET_SMSC95XX. Changes in v2: - Moved 'net' patches from here to the separate patch series; - Removed redundant call of the phy_start_aneg after phy_start; - Removed netif_dbg tracing "speed, duplex, lcladv, and rmtadv"; - mdiobus: added dependency from the usbnet device; - Moved making of the MII address from 'phy_id' and 'idx' into the function mii_address; - Moved direct MDIO accesses under condition 'if (pdata->internal_phy)', as they only need for the internal PHY; - To be sure, that this set of patches is git-bisectable, tested each sub-set of patches to be functional for both, internal and external PHYs, including suspend/resume test for the 'devices' (5.7.8-1-ARCH, Raspberry Pi 3 Model B). ==================== Signed-off-by: David S. Miller --- 0baf01942d3dc52ea7f52c34cb88c6be39de6129