From: Manivannan Sadhasivam Date: Sat, 14 Jan 2023 07:10:06 +0000 (+0530) Subject: phy: qcom-qmp-ufs: Avoid setting HS G3 specific registers X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=0d46b98d3a65c4de979073728cdf4c2ad896b767;p=linux.git phy: qcom-qmp-ufs: Avoid setting HS G3 specific registers SM8350 default init sequence sets some PCS registers to HS G3, thereby disabling HS G4 mode. This has the effect on MPHY capability negotiation between the host and the device during link startup and causes the PA_MAXHSGEAR to G3 irrespective of device max gear. Due to that, the agreed gear speed determined by the UFS core will become G3 only and the platform won't run at G4. So, let's remove setting these registers for SM8350 as like other G4 compatible platforms. One downside of this is that, when the board design uses non-G4 compatible device, then MPHY will continue to run in the default mode (G4) even if UFSHCD runs in G3. But this is the case for other platforms as well. Tested-by: Andrew Halaney # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20230114071009.88102-10-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul --- diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 152b1b367df38..421359ca62ba4 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -572,13 +572,6 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02), };