From: satya priya Date: Tue, 25 May 2021 10:10:57 +0000 (+0530) Subject: arm64: dts: qcom: pm7325: Add pm7325 base dts file X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=0e17fe8cf8e112599c9812904f9eecdc3e8cde14;p=linux.git arm64: dts: qcom: pm7325: Add pm7325 base dts file Add base DTS file for pm7325 along with GPIOs and temp-alarm nodes. Signed-off-by: satya priya Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/1621937466-1502-3-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi new file mode 100644 index 0000000000000..e7f64a9ddc9cb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: BSD-3-Clause +// Copyright (c) 2021, The Linux Foundation. All rights reserved. + +#include +#include + +&spmi_bus { + pm7325: pmic@1 { + compatible = "qcom,pm7325", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm7325_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm7325_gpios: gpios@8800 { + compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm7325_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&thermal_zones { + pm7325_thermal: pm7325-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm7325_temp_alarm>; + + trips { + pm7325_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm7325_crit: pm7325-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; +};