From: Arnd Bergmann Date: Wed, 5 Oct 2022 08:12:43 +0000 (+0200) Subject: Revert "ARM: dts: BCM5301X: Add basic PCI controller properties" X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=114b9da7ebd964697a7ca5f85f68f61503e91f3a;p=linux.git Revert "ARM: dts: BCM5301X: Add basic PCI controller properties" Adding the #address-cells/#size-cells properties without also adding the other required properties for PCI nodes causes new build warnings from dtc that now show up everywhere, rather than just while verifying the yaml bindings: arch/arm/boot/dts/bcm5301x.dtsi:240.21-246.5: Warning (pci_bridge): /axi@18000000/pcie@12000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:248.21-254.5: Warning (pci_bridge): /axi@18000000/pcie@13000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:256.21-262.5: Warning (pci_bridge): /axi@18000000/pcie@14000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' Revert it for now. Fixes: 61dc1e3850a6 ("ARM: dts: BCM5301X: Add basic PCI controller properties") Reported-by: Stephen Rothwell Signed-off-by: Arnd Bergmann --- diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index a06184b8e0d9a..5fc1b847f4aa5 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -239,26 +239,14 @@ pcie0: pcie@12000 { reg = <0x00012000 0x1000>; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; }; pcie1: pcie@13000 { reg = <0x00013000 0x1000>; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; }; pcie2: pcie@14000 { reg = <0x00014000 0x1000>; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; }; usb2: usb2@21000 {