From: Cai Huoqing Date: Thu, 3 Nov 2022 08:05:10 +0000 (+0800) Subject: net: hinic: Add control command support for VF PMD driver in DPDK X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=13265568a8633ab0d22e9def8cd9b8b0edb3ca85;p=linux.git net: hinic: Add control command support for VF PMD driver in DPDK HINIC has a mailbox for PF-VF communication and the VF driver could send port control command to PF driver via mailbox. The control command only can be set to register in PF, so add support in PF driver for VF PMD driver control command when VF PMD driver work with linux PF driver. Then, no need to add handlers to nic_vf_cmd_msg_handler[], because the host driver just forwards it to the firmware. Actually the firmware works on a coprocessor MGMT_CPU(inside the NIC) which will recv and deal with these commands. Signed-off-by: Cai Huoqing Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h index 6dae116a11f89..6b5797e697819 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h @@ -51,6 +51,9 @@ enum hinic_port_cmd { HINIC_PORT_CMD_ADD_VLAN = 0x3, HINIC_PORT_CMD_DEL_VLAN = 0x4, + HINIC_PORT_CMD_SET_ETS = 0x7, + HINIC_PORT_CMD_GET_ETS = 0x8, + HINIC_PORT_CMD_SET_PFC = 0x5, HINIC_PORT_CMD_SET_MAC = 0x9, @@ -59,6 +62,8 @@ enum hinic_port_cmd { HINIC_PORT_CMD_SET_RX_MODE = 0xC, + HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE = 0xD, + HINIC_PORT_CMD_GET_PAUSE_INFO = 0x14, HINIC_PORT_CMD_SET_PAUSE_INFO = 0x15, @@ -81,6 +86,7 @@ enum hinic_port_cmd { HINIC_PORT_CMD_GET_RSS_TEMPLATE_INDIR_TBL = 0x25, HINIC_PORT_CMD_SET_PORT_STATE = 0x29, + HINIC_PORT_CMD_GET_PORT_STATE = 0x30, HINIC_PORT_CMD_SET_RSS_TEMPLATE_TBL = 0x2B, @@ -100,17 +106,29 @@ enum hinic_port_cmd { HINIC_PORT_CMD_RSS_CFG = 0x42, + HINIC_PORT_CMD_GET_PHY_TYPE = 0x44, + HINIC_PORT_CMD_FWCTXT_INIT = 0x45, HINIC_PORT_CMD_GET_LOOPBACK_MODE = 0x48, HINIC_PORT_CMD_SET_LOOPBACK_MODE = 0x49, + HINIC_PORT_CMD_GET_JUMBO_FRAME_SIZE = 0x4A, + HINIC_PORT_CMD_SET_JUMBO_FRAME_SIZE = 0x4B, + HINIC_PORT_CMD_ENABLE_SPOOFCHK = 0x4E, HINIC_PORT_CMD_GET_MGMT_VERSION = 0x58, + HINIC_PORT_CMD_GET_PORT_TYPE = 0x5B, + HINIC_PORT_CMD_SET_FUNC_STATE = 0x5D, + HINIC_PORT_CMD_GET_PORT_ID_BY_FUNC_ID = 0x5E, + + HINIC_PORT_CMD_GET_DMA_CS = 0x64, + HINIC_PORT_CMD_SET_DMA_CS = 0x65, + HINIC_PORT_CMD_GET_GLOBAL_QPN = 0x66, HINIC_PORT_CMD_SET_VF_RATE = 0x69, @@ -125,25 +143,73 @@ enum hinic_port_cmd { HINIC_PORT_CMD_SET_RQ_IQ_MAP = 0x73, + HINIC_PORT_CMD_SET_PFC_THD = 0x75, + HINIC_PORT_CMD_LINK_STATUS_REPORT = 0xA0, + HINIC_PORT_CMD_SET_LOSSLESS_ETH = 0xA3, + HINIC_PORT_CMD_UPDATE_MAC = 0xA4, HINIC_PORT_CMD_GET_CAP = 0xAA, + HINIC_PORT_CMD_UP_TC_ADD_FLOW = 0xAF, + HINIC_PORT_CMD_UP_TC_DEL_FLOW = 0xB0, + HINIC_PORT_CMD_UP_TC_GET_FLOW = 0xB1, + + HINIC_PORT_CMD_UP_TC_FLUSH_TCAM = 0xB2, + + HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK = 0xB3, + + HINIC_PORT_CMD_UP_TC_ENABLE = 0xB4, + + HINIC_PORT_CMD_UP_TC_GET_TCAM_BLOCK = 0xB5, + + HINIC_PORT_CMD_SET_IPSU_MAC = 0xCB, + HINIC_PORT_CMD_GET_IPSU_MAC = 0xCC, + + HINIC_PORT_CMD_SET_XSFP_STATUS = 0xD4, + HINIC_PORT_CMD_GET_LINK_MODE = 0xD9, HINIC_PORT_CMD_SET_SPEED = 0xDA, HINIC_PORT_CMD_SET_AUTONEG = 0xDB, + HINIC_PORT_CMD_CLEAR_QP_RES = 0xDD, + + HINIC_PORT_CMD_SET_SUPER_CQE = 0xDE, + + HINIC_PORT_CMD_SET_VF_COS = 0xDF, + HINIC_PORT_CMD_GET_VF_COS = 0xE1, + + HINIC_PORT_CMD_CABLE_PLUG_EVENT = 0xE5, + + HINIC_PORT_CMD_LINK_ERR_EVENT = 0xE6, + + HINIC_PORT_CMD_SET_COS_UP_MAP = 0xE8, + + HINIC_PORT_CMD_RESET_LINK_CFG = 0xEB, + HINIC_PORT_CMD_GET_STD_SFP_INFO = 0xF0, + HINIC_PORT_CMD_FORCE_PKT_DROP = 0xF3, + HINIC_PORT_CMD_SET_LRO_TIMER = 0xF4, + HINIC_PORT_CMD_SET_VHD_CFG = 0xF7, + + HINIC_PORT_CMD_SET_LINK_FOLLOW = 0xF8, + HINIC_PORT_CMD_SET_VF_MAX_MIN_RATE = 0xF9, HINIC_PORT_CMD_GET_SFP_ABS = 0xFB, + + HINIC_PORT_CMD_Q_FILTER = 0xFC, + + HINIC_PORT_CMD_TCAM_FILTER = 0xFE, + + HINIC_PORT_CMD_SET_VLAN_FILTER = 0xFF, }; /* cmd of mgmt CPU message for HILINK module */ diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c index f7e05b41385bf..ee357088d0218 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c @@ -489,6 +489,24 @@ static struct vf_cmd_check_handle nic_cmd_support_vf[] = { {HINIC_PORT_CMD_UPDATE_MAC, hinic_mbox_check_func_id_8B}, {HINIC_PORT_CMD_GET_CAP, hinic_mbox_check_func_id_8B}, {HINIC_PORT_CMD_GET_LINK_MODE, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_GET_VF_COS, NULL}, + {HINIC_PORT_CMD_SET_VHD_CFG, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_SET_VLAN_FILTER, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_Q_FILTER, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_TCAM_FILTER, NULL}, + {HINIC_PORT_CMD_UP_TC_ADD_FLOW, NULL}, + {HINIC_PORT_CMD_UP_TC_DEL_FLOW, NULL}, + {HINIC_PORT_CMD_UP_TC_FLUSH_TCAM, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_UP_TC_ENABLE, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_CABLE_PLUG_EVENT, NULL}, + {HINIC_PORT_CMD_LINK_ERR_EVENT, NULL}, + {HINIC_PORT_CMD_SET_PORT_STATE, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_SET_ETS, NULL}, + {HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE, NULL}, + {HINIC_PORT_CMD_RESET_LINK_CFG, hinic_mbox_check_func_id_8B}, + {HINIC_PORT_CMD_SET_LINK_FOLLOW, NULL}, + {HINIC_PORT_CMD_CLEAR_QP_RES, NULL}, }; #define CHECK_IPSU_15BIT 0X8000