From: Khouloud Touil Date: Tue, 7 Jan 2020 09:29:18 +0000 (+0100) Subject: dt-bindings: nvmem: new optional property wp-gpios X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=14f4957313fbf575c7bbd37d45cb148e11fdbc20;p=linux.git dt-bindings: nvmem: new optional property wp-gpios Several memories have a write-protect pin, that when pulled high, it blocks the write operation. On some boards, this pin is connected to a GPIO and pulled high by default, which forces the user to manually change its state before writing. Instead of modifying all the memory drivers to check this pin, make the NVMEM subsystem check if the write-protect GPIO being passed through the nvmem_config or defined in the device tree and pull it low whenever writing to the memory. Add a new optional property to the device tree binding document, which allows to specify the GPIO line to which the write-protect pin is connected. Signed-off-by: Khouloud Touil Reviewed-by: Linus Walleij Reviewed-by: Rob Herring Signed-off-by: Bartosz Golaszewski --- diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index 1c75a059206c5..b43c6c65294ed 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -34,6 +34,14 @@ properties: description: Mark the provider as read only. + wp-gpios: + description: + GPIO to which the write-protect pin of the chip is connected. + The write-protect GPIO is asserted, when it's driven high + (logical '1') to block the write operation. It's deasserted, + when it's driven low (logical '0') to allow writing. + maxItems: 1 + patternProperties: "^.*@[0-9a-f]+$": type: object @@ -63,9 +71,12 @@ patternProperties: examples: - | + #include + qfprom: eeprom@700000 { #address-cells = <1>; #size-cells = <1>; + wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; /* ... */