From: Manu Gautam <mgautam@codeaurora.org>
Date: Thu, 31 May 2018 10:47:10 +0000 (+0530)
Subject: arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=1504b91c819359b574b55c269c850352260b8d19;p=linux.git

arm64: dts: msm8996: Use dwc3-qcom glue driver for USB

Move from dwc3-of-simple to dwc3-qcom glue driver to
support peripheral mode which requires qscratch wrapper
programming on VBUS event.

Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index bf20c55a6bc4a..6d50449fbcdf0 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -385,8 +385,9 @@
 			status = "okay";
 		};
 
-		usb@6a00000 {
+		usb@6af8800 {
 			status = "okay";
+			extcon = <&usb3_id>;
 
 			dwc3@6a00000 {
 				extcon = <&usb3_id>;
@@ -401,8 +402,9 @@
 			pinctrl-0 = <&usb3_vbus_det_gpio>;
 		};
 
-		usb@7600000 {
+		usb@76f8800 {
 			status = "okay";
+			extcon = <&usb2_id>;
 
 			dwc3@7600000 {
 				extcon = <&usb2_id>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8585c61e32efa..99b7495455a62 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -893,8 +893,9 @@
 			status = "disabled";
 		};
 
-		usb2: usb@7600000 {
-			compatible = "qcom,dwc3";
+		usb2: usb@76f8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x76f8800 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -921,8 +922,9 @@
 			};
 		};
 
-		usb3: usb@6a00000 {
-			compatible = "qcom,dwc3";
+		usb3: usb@6af8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x6af8800 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;