From: Amit Kucheria <amit.kucheria@linaro.org>
Date: Mon, 21 Oct 2019 10:35:25 +0000 (+0530)
Subject: arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=15424f4fa9d733a6b62da3839cd9e71e056214d7;p=linux.git

arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors

msm8916 uses sensors 0, 1, 2, 4 and 5. Sensor 3 is NOT used. Fixup the
device tree so that the correct sensor ID is used and as a result we can
actually check the temperature for the cpu2_3 sensor.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <agross@kernel.org>
---

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5ea9fb8f2f87d..8686e101905cc 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -179,7 +179,7 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&tsens 4>;
+			thermal-sensors = <&tsens 5>;
 
 			trips {
 				cpu0_1_alert0: trip-point@0 {
@@ -209,7 +209,7 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&tsens 3>;
+			thermal-sensors = <&tsens 4>;
 
 			trips {
 				cpu2_3_alert0: trip-point@0 {