From: Marek Vasut <marex@denx.de>
Date: Fri, 17 Feb 2023 19:26:45 +0000 (+0100)
Subject: arm64: dts: imx8mp: Adjust EQoS PHY address on i.MX8MP DHCOM
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=15a03a2225af52da1f3e152593740f1a78b9dd62;p=linux.git

arm64: dts: imx8mp: Adjust EQoS PHY address on i.MX8MP DHCOM

The current variant of the SoM has LAN8740Ai PHY connected to EQoS
strapped to MDIO address 0 , adjust the MDIO address to match the
hardware.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 1471a17045f7a..d34020e83bbde 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -94,14 +94,14 @@
 		#size-cells = <0>;
 
 		/* Up to one of these two PHYs may be populated. */
-		ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+		ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio3>;
 			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;
 			pinctrl-names = "default";
-			reg = <1>;
+			reg = <0>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
 			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;