From: Shawn Lin Date: Fri, 30 Sep 2016 06:18:58 +0000 (+0800) Subject: mmc: core: switch to 1V8 or 1V2 for hs400es mode X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=1720d3545b772c49b2975eeb3b8f4d3f56dc2085;p=linux.git mmc: core: switch to 1V8 or 1V2 for hs400es mode When introducing hs400es, I didn't notice that we haven't switched voltage to 1V2 or 1V8 for it. That happens to work as the first controller claiming to support hs400es, arasan(5.1), which is designed to only support 1V8. So the voltage is fixed to 1V8. But it actually is wrong, and will not fit for other host controllers. Let's fix it. Fixes: commit 81ac2af65793ecf ("mmc: core: implement enhanced strobe support") Cc: Signed-off-by: Shawn Lin Reviewed-by: Douglas Anderson Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 3486bc7fbb64a..f4ed5accafd06 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1263,6 +1263,16 @@ static int mmc_select_hs400es(struct mmc_card *card) goto out_err; } + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_2V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_8V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + goto out_err; + err = mmc_select_bus_width(card); if (err < 0) goto out_err;