From: Bjorn Andersson <quic_bjorande@quicinc.com>
Date: Fri, 1 Dec 2023 00:11:10 +0000 (-0800)
Subject: arm64: dts: qcom: sc8180x-primus: Fix HALL_INT polarity
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=1aaa08e8de365cce59203541cafadb5053b1ec1a;p=linux.git

arm64: dts: qcom: sc8180x-primus: Fix HALL_INT polarity

The hall sensor interrupt on the Primus is active low, which means that
with the current configuration the device attempts to suspend when the
LID is open.

Fix the polarity of the HALL_INT GPIO to avoid this.

Fixes: 2ce38cc1e8fe ("arm64: dts: qcom: sc8180x: Introduce Primus")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231130-sc8180x-primus-lid-polarity-v1-1-da917b59604b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index fd2fab4895b39..a40ef23a2a4f5 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -43,7 +43,7 @@
 		pinctrl-0 = <&hall_int_active_state>;
 
 		lid-switch {
-			gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
 			wakeup-source;