From: Michal Vokáč Date: Fri, 8 Feb 2019 18:24:48 +0000 (+0100) Subject: ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=1ac1d4845c013af9ca003adda7dfedb25a8e42ec;p=linux.git ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity The reset signal of the SSD1306 OLED display is actually active-low. Adapt the DT to reflect the real world. Reviewed-by: Rob Herring Acked-by: Alexandre Belloni Cc: Shawn Guo Cc: Fabio Estevam Cc: Maxime Ripard , Signed-off-by: Michal Vokáč Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index d3e3622979c5b..de48b5808ef6e 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "imx28.dtsi" +#include / { model = "Crystalfontz CFA-10036 Board"; @@ -96,7 +97,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ssd1306_cfa10036>; reg = <0x3c>; - reset-gpios = <&gpio2 7 0>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; solomon,height = <32>; solomon,width = <128>; solomon,page-offset = <0>;