From: Zhang Qilong Date: Sat, 7 Nov 2020 11:05:52 +0000 (+0800) Subject: mtd: rawnand: gpmi: fix reference count leak in gpmi ops X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=1b391c7f2e863985668d705f525af3ceb55bc800;p=linux.git mtd: rawnand: gpmi: fix reference count leak in gpmi ops pm_runtime_get_sync() will increment pm usage at first and it will resume the device later. If runtime of the device has error or device is in inaccessible state(or other error state), resume operation will fail. If we do not call put operation to decrease the reference, it will result in reference leak in the two functions(gpmi_init and gpmi_nfc_exec_op). Moreover, this device cannot enter the idle state and always stay busy or other non-idle state later. So we fixed it through adding pm_runtime_put_noidle. Fixes: 5bc6bb603b4d0 ("mtd: rawnand: gpmi: Fix suspend/resume problem") Signed-off-by: Zhang Qilong Acked-by: Han Xu Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20201107110552.1568742-1-zhangqilong3@huawei.com --- diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index dc8104e675062..b5f46f214a582 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -149,8 +149,10 @@ static int gpmi_init(struct gpmi_nand_data *this) int ret; ret = pm_runtime_get_sync(this->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_noidle(this->dev); return ret; + } ret = gpmi_reset_block(r->gpmi_regs, false); if (ret) @@ -2263,8 +2265,10 @@ static int gpmi_nfc_exec_op(struct nand_chip *chip, this->transfers[i].direction = DMA_NONE; ret = pm_runtime_get_sync(this->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_noidle(this->dev); return ret; + } /* * This driver currently supports only one NAND chip. Plus, dies share